Extron electronic MSX1616HR operation manual Resetting the Switcher, Activating RGB Delay

22

Resetting the Switcher

1.Press MENU until 0DLQ￿0HQX displays in the LCD.

2.Press the soft key pointing to $GYDQFHG. Result: $GYDQFHG￿0HQX displays in the LCD.

3.Select the soft key pointing to 5HVHW￿8QLW. Result: 5HVHW￿0HQX displays in the LCD.

4.You can do either a partial reset or a full reset.

a.To do a partial reset, press the soft key pointing to 3DUWLDO￿5HVHW.

Result: The switcher resets the RS232 serial port, opens all input/output patches, resets all volume levels, sets all outputs to un-mute state, and removes any address given to the unit.

i.Press ENTER to reset.

ii.Press MENU to exit.

b.To do a full reset, press the button pointing to )XOO￿5HVHW.

Result: The switcher resets the RS232 serial port, opens all input/output patches, resets all volume levels, removes any address given to the unit, and clears all saved presets and labels. This process may take up to 2 minutes, if all presets are used.

i.Press ENTER to reset.

ii.Press MENU to exit.

Activating RGB Delay

This feature allows older model projectors (or a series of projectors) time to synchronize their signals so the image pops cleanly and clearly onto the screens. Set RGB delay for up to 6 seconds.

1.Press MENU until 0DLQ￿0HQX displays in the LCD.

2.Press the soft key pointing to $GYDQFHG. Result: Advanced Menu displays in the LCD.

3.Select the soft key pointing to 5*%￿'HOD\. Result: 5*%￿'HOD\￿7LPH displays in the LCD.

4.Use either the up-and-down or the left-and-right menu navigation buttons to set the RGB delay time.

5.Press ENTER to accept the changes.

6.Press MENU to exit.

MSX1616 OPERATION MANUAL - v1.0 5/8/02  2002 - INLINE, INC.