Extron electronic MSX1616HR Installation, Mounting the MSX1616, Device Connections

Page 9

Installation

Mounting the MSX1616

Mount the MSX1616 switcher on a standard 19-inch metal equipment rack. The unit is 6U tall. Allow 1U above and below the switcher for heat dissipation.

To rack-mount the switcher:

1.Slide the switcher into the equipment rack.

2.Align the mounting holes of the unit with those of the rack.

3.Fasten the switcher to the rack using the machine screws included with the rack.

Device Connections

All connections (including switches, serial ports, and power, audio, and video BNC connectors) are on the rear panel of the switcher.

Power Connection

Attach the power cord to the connector on the rear of the switcher. A standard IEC power cord comes with the unit. Plug it into a 100 – 240 VAC, 50 Hz, or 60 Hz power source.

 2002 - INLINE, INC.

MSX1616 OPERATION MANUAL - v1.0 5/8/02

Image 9

Contents MSX1616/MSX1616HR Instructions d’installation et de sécurité Installation and Safety InstructionsInstallations- und Sicherheitshinweise Instalacion E Instrucciones de SeguridadTable of Contents Warranty MSX1616 Matrix Switcher Quick Start InstallationStep Functionality Front Panel ControlsProduct Features Product OverviewDescription MSX1616 model Numbers Dual Switching ModesPower Connection InstallationMounting the MSX1616 Device ConnectionsAudio Input and Output Connections Video Input and Output ConnectionsFor Unbalanced Stereo Audio Input For Unbalanced Stereo Audio OutputHalf Duplex RS-485 Connection Diagram DIP Switch Settings StandardSerial Ports RS-232/422/485 ConnectionsTermination DIP Switch 2002 INLINE, INC Compatibility InputOutput  2002 INLINE, INC  2002 INLINE, INC Operation Menu Enter Volume Take Cancel Blank Preset Input OutputCreating Presets in Matrix Mode Creating a Patch in Matrix ModeFront Panel Operation To confirm the patchTo recall a saved preset Previewing Patches in Preview ModeRecalling Presets in Express Mode Hierarchy of LCD Screens Q2XWMenu Programming Level SelectionOr Out Audio Setup Advanced Menu Setting up Serial PortsActivating RGB Delay Resetting the SwitcherCommunication Protocol Remote OperationControl Port Protocol StructurePreset Codes Auxiliary Ports 2Input and Output Codes Serial Port Pin-outs Addressing Commands Serial CommandsADDRxx ADDR@ ADDR?ARC Set-Up CommandsCPx@ CPx? DFLTx FPx LBLIiiabcde… LBLOooabcde… RESxLevel Commands RGBxx VISxLVLx LVL?? LVLxyyy Switching Commands TakeExample SsBLANKoo Volume CommandsMUTEoox Mute MUTE?VOLL? VOLR?Volstop VINiix VINiixxx LMUTE,?LVOL,? LVOLL,? Auxiliary CommandsLVOLR,? PCPpxCommand PCCpIii PCCpOoo PCCpPmmm PCPDpxx Preset CommandsPrst PSVxxx PRCxxxPreset Label Commands PSVxxx@PLBL1xxx? PLBL2xxx? PSV?  2002 INLINE, INC INLINE, Inc West Taft ORANGE, CA Warranty