Operation
This section discusses how to configure and operate the MPS 601. Topics that are covered include:
•Front Panel Features
•HDCP
•Audio Features
•
•Front Panel Lockout (Executive Mode)
•Reset Mode
•EDID Minder
Front Panel Features
A B |
|
|
|
| C |
|
|
|
|
|
| D |
| E F G | |||||
|
|
|
|
|
|
|
| INPUTS |
|
|
|
|
|
| INPUTS |
| OUTPUT | ||
|
| 1 |
| 2 |
| 3 |
|
| 4 |
| 5 |
| 6 | SIGNAL |
|
|
|
|
|
AUTO |
|
|
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
SWITCH CONFIG |
|
|
|
|
|
|
|
|
|
|
|
|
| HDCP |
|
|
|
| MPS 601 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MEDIA PRESENTATION SWITCHER |
Figure 13. MPS 601 Front Panel
AAuto Switch LED — This LED lights when
BConfig connector — One female USB mini B port connects a host computer for configuring the switcher and upgrading firmware.
CInput switching buttons — Six buttons with associated green LEDs. Press an input button to switch an input to the HDMI output. Only one of the six inputs can be selected at a time.
DInput signal LEDs — Six green LEDs:
•The LEDs for RGB inputs 1 and 2 light when horizontal sync is detected on the input.
•The LEDs for HDMI inputs 3 to 6 light when TMDS clock activity is detected on the input.
NOTE: If a connected HDMI source is HDCP encrypted, the HDMI signal LED does not light until HDCP is authenticated. If HDCP authorization is disabled, the switcher does not display content with HDCP encryption.
EOutput signal LED — This LED lights when the HDMI output is connected to a display or sink device.
FHDCP input signal LEDs (inputs 4 to 6 only) — These LEDs light when the connected source device is HDCP encrypted.
GHDCP output LED — This LED lights when the currently selected input source requires HDCP and the connected output device (sink) is authenticated.
MPS 601 • Operation | 11 |