Hardware Pages
The Hardware pages contain unit information and options for device information, device naming, executive mode, and reset mode. Click the Hardware tab to open these pages.
Figure 33. Hardware Global Navigation Bar
Unit Information Page
This page gives a
The following information displays:
•Part number – The Extron part number of the connected MPS 601.
•Model name – The model name of the connected MPS 601.
•Model description – The model description of the connected MPS 601.
•Firmware version – The current firmware version of the connected MPS 601.
Figure 34. Unit Information Panel
Device Name Page
This page allows users to assign or change the name of the connected device. Click the Device Name icon on the Global Navigation Bar to open this page.
Figure 35. Device Name Page
To assign or change the device name:
1.Enter a name for the device in the name field. The name can be up to 63 alphanumeric characters in length with no spaces between characters. If an invalid name is entered, a red symbol appears to the right of the name field.
2.Click Apply to change the name or click Cancel to keep the previous name.
To reset the name to the factory default:
Click Reset to Default.
MPS 601 • Software Configuration and Control | 41 |