Extron electronic MPS 601 Auto-input Switching, Front Panel Lockout Executive Mode, Reset Mode

Page 20

Autodetect for Audio

Autodetect for audio is enabled when audio mode 3 is active. Audio InfoFrame data embedded in the digital signal is sampled to determine if audio is present on the selected HDMI stream.

•If audio is present on the incoming stream, it is selected for output.

•If audio is not present on the incoming HDMI stream, audio input A is substituted when video input 3 or video input 5 is selected, or audio input B is substituted when video input 4 or video input 6 is selected is selected (see Mode 3 on page 13).

Auto-input Switching

Using software control, the switcher can be configured to automatically switch to the highest or lowest input number with active video (see Input auto switching on page 24 for SIS control and Audio Config Page on page 39 for PCS operation). If the selected input does not have active video, the input is switched according to the selection:

•Priority to the highest active input number — Automatically switches to the highest numbered input with active video.

•Priority to the lowest active input number — Automatically switches to the lowest numbered input with active video.

NOTE: When auto-input switching is enabled and if video is absent from all inputs, input 1 is selected.

Front Panel Lockout (Executive Mode)

Executive mode provides security from an accidental or unauthorized front panel button press by locking out the input switching buttons.

The RS-232 and USB ports are always accessible regardless of the executive mode state. To enable executive mode:

•Press and hold input 1 and input 2 for 3 seconds to toggle executive mode on or off.

•All front panel LEDs flash twice to indicate that executive mode is enabled or disabled.

While executive mode is enabled, all front panel LEDs flash twice when any button is pressed.

Reset Mode

To reset the switcher to default settings from the front panel:

•Pull the power connector to remove power from the switcher.

•Press and hold Input 1 on the front panel while connecting power.

•Continue to hold Input 1 until the power up sequence is complete.

MPS 601 • Operation

14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Media Presentation Switcher MPSSafety Instructions FCC Class a Notice Software Commands NotificationsContents MPS 601 Switcher Contents About the MPS IntroductionAbout this User Guide Features Media Presentation SwitcherExtron IPLMPS 601 Introduction Installation Mounting the SwitcherConnections Control Device Connections Contact In/Tally Out SixPower and Input WiringOutput Rgbhv video inputs TwoContact In and Tally Out Connector Wiring Control DevicesContact Closure and Tally Output Application Diagrams Contact Closure Application Diagram with Show Me CablesContact Closure Application Diagram with Individual Switch Lockit Lacing Bracket Installation Lockit Lacing BracketsCabling the MPS 601 Switcher Operation Front Panel FeaturesInput signal LEDs Six green LEDs Media Presentation Audio FeaturesMode 1 Default Mode Hdmi HdmiAuto-input Switching Front Panel Lockout Executive ModeReset Mode Autodetect for AudioEdid Minder Automatic ModeInput Group Default Edid User assigned Edid Mode Native Refresh Rate Type Video Audio Resolution FormatHdtv Hdmi Connection Options Remote Control Port RS-232Remote Communication Control Front Panel Configuration Port To connect the MPS 601 to a host computerInstall the Software Automatically MPS Switcher-initiated Messages MPS Switcher Error ResponsesBoot-up messages Host-to-MPS CommunicationsSymbol definitions Command and Response TableUsing the Command and Response Table X3# Command and response table for SIS commands Command Ascii Command Response DescriptionEX!*X3PHAS X!*XHDCP  A X!*X& EDID  Configuration Software Installing the SoftwareStarting the Software Connect to Online DeviceConnect Using the SoftwareConnections Menu Update Firmware Tools MenuDisconnect ExitMPS 601 Software Configuration and Control Navigating the PCS Application AV Controls PanelInput Configuration panel Configuration PagesInput/Output Configuration Output Configuration panel Edid Minder InputsAssigning Edid Available Edid panelFiltering Available Edid Adding Edid to the Edid Library Image SettingsSignal Sampling Audio Config Audio ConfigurationVisual Indication of Mute Status panel Device SettingsAuto Switch panel To reset the name to the factory default Hardware PagesUnit Information Device NameExecutive Mode Executive modeReset Device To reset the deviceUL Rack Mounting Guidelines Reference InformationMounting Options Rack Mounting Table or Wall MountingThrough-desk Mounting DataViewer Starting the DataViewer programDownload the latest firmware file To access the firmware loaderUpdating Firmware Extron Warranty

MPS 601 specifications

The Extron MPS 601 is a versatile multimedia presentation switcher designed to simplify the management and integration of audio and video signals in various professional environments. This compact equipment caters to classrooms, conference rooms, and other settings that require seamless multimedia presentations.

One of the standout features of the MPS 601 is its ability to handle multiple input sources. It offers an array of connectors that include HDMI, VGA, composite video, and audio inputs, allowing users to easily switch between different devices such as laptops, document cameras, and video players. This versatility ensures that presenters can connect their preferred technology without the need for cumbersome adapters or converters.

The MPS 601 incorporates a built-in scaler, which enhances the quality of the output signal by adjusting the resolution to suit the display requirements. This feature ensures optimal image clarity and sharpness, crucial for effective presentations. Additionally, the switcher supports various output resolutions, catering to both standard and high-definition displays.

In terms of control options, the MPS 601 provides users with multiple ways to operate the switcher. The front panel features intuitive buttons for quick access to input selection, along with a large, easy-to-read LED display that indicates the currently selected source. Furthermore, users can utilize RS-232 or Ethernet control for integration with third-party control systems, allowing for automation and enhanced functionality.

Another key characteristic of the MPS 601 is its audio capabilities. It supports embedded audio from HDMI sources, as well as separate audio routing through its balanced and unbalanced outputs. This flexibility ensures that audio is perfectly synchronized with video, delivering an immersive multimedia experience.

Furthermore, the MPS 601 is designed with reliability in mind. Extron's commitment to quality ensures that the hardware is built to endure the rigors of daily use, making it a reliable choice for any educational or corporate environment.

In summary, the Extron MPS 601 presents a comprehensive solution for multimedia presentations, combining multiple input handling, advanced scaling capabilities, flexible control options, and robust audio support. This switcher stands out as an essential tool for professionals seeking to enhance their presentation experience while maintaining ease of use and reliability.
Top Page Image Contents