Reference
Information
This section discusses the specifications, part numbers, and accessories for the MPS 601. Topics that are covered, include:
•Mounting Options
•DataViewer
•Updating Firmware
Mounting Options
The MPS 601 is housed in 1U tall, half rack width, six inches deep metal enclosure,
rack- or
(see www.extron.com).
UL Rack Mounting Guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the MPS 601 in a rack.
1.Elevated operating ambient temperature — If installed in a closed or
2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.
3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.
4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
5.Reliable earthing (grounding) — Maintain reliable grounding of
MPS 601 • Reference Information | 44 |