Gigabyte 8S648FXP-RZ-C user manual Power On by Keyboard, Power On by Mouse, Resume by Alarm

Page 28

English

Power On by Keyboard

Any Key

Set keyboard power on by any key.

Password

Enter from 1 to 8 characters to set the keyboard power on password.

Disabled

Disabled this function. (Default value)

Power On by Mouse

Enabled

Power on system by move or click the mouse.

Disabled

Disable this function. (Default value)

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Date/time to power on system.

Disabled

Disable this function. (Default value)

Enabled

Enable alarm function to POWER ON system.

If RTC Alarm Lead To Power On is Enabled.

Month Alarm :

 

NA, 1~12

Day (of Month) :

 

Everyday, 1~31

Time (hh: mm: ss) :

(0~23) : (0~59) : (0~59)

Power LED in S1 state

Blinking

In standby mode(S1), power LED will blink. (Default value)

Dual/OFF

In standby mode(S1):

 

a. If use single color LED, power LED will turn off.

 

b. If use dual color LED, power LED will turn to another color.

8S648FXP-RZ Series Motherboard

- 28 -

Image 28
Contents 8S648FXP-RZ / 8S648FXP-RZ-C Motherboard 8S648FXP-RZ Installing the motherboard to the chassis Preparing Your ComputerTable of Contents Features Summary Introduction8S648FXP-RZ Series Motherboard Layout Cdin P4 TitanBlock Diagram Install the Central Processing Unit CPU Hardware Installation ProcessStep CPU Installation Install Memory Modules Install AGP Card Install I/O Peripherals CablesCdin FUSB1 / FUSB215 IR 17 BATATX12V / ATX Power Connector Cpufan / Sysfan Cooler Fan Power ConnectorIDE1 / IDE2 IDE1 / IDE2 Connector FDD FDD ConnectorSATA0 / SATA1 Serial ATA Connector Fpanel 2 x 10 pins Connector Faudio Front Audio Connector Spdifio Spdif In/Out ConnectorCdin CD In Connector Surcen Surround Center ConnectorFUSB1 / FUSB2 Front USB Connector BAT Battery Clrcmos Clear CmosStatus Page Setup Menu / Option Page Setup Menu Main Menu For example Bios Ver. E10Main Menu Advanced Bios Features Power Management SetupPnP/PCI Configuration Load Fail-Safe DefaultsStandard Cmos Features DateTime IDE Channel 0 Master, Slave / IDE Channel 1 Master, SlaveFloppy 3 Mode Support for Japan Area Drive a / Drive BHalt on MemoryAdvanced Bios Features Hard Disk Boot PriorityFirst / Second / Third Boot Device Boot Up Floppy SeekPassword Check CPU Hyper-ThreadingLimit Cpuid Max. to Init Display FirstIntegrated Peripherals SiS Serial ATA Mode Parallel Port ModeECP Mode Use DMA USB ControllerPower Management Setup Power On by Keyboard Power On by MouseResume by Alarm Power LED in S1 statePnP/PCI Configurations PCI 4 IRQ AssignmentPCI 1/PCI 5 IRQ Assignment PCI 2 IRQ AssignmentCurrent CPU Temperature PC Health StatusCurrent Voltage V Vcore / DDR2.5V / +3.3V / +12V Current CPU/SYSTEM FAN Speed RPMMB Intelligent TweakerM.I.T Top Performance Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor/User Password ConfigurationsEnter PasswordSave & Exit Setup Exit Without SavingEnglish Install Drivers Pictures below are shown in Windows XPItem Description Contact Us Taiwan HeadquartersChina Shanghai