Gigabyte 8S648FXP-RZ-C user manual Fpanel 2 x 10 pins Connector

8) PWR_LED

PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.

	Pin No.	Definition
1	1	MPD+
	2	MPD-
	3	MPD-

9) F_PANEL (2 x 10 pins Connector)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.

Message LED/Power/
Sleep LED	Power Switch Speaker Connector

	MSG+ MSG- PW+ PW-	SPEAK+	SPEAK-
	2		20
	1		19
	HD+ HD- RES- RES+ NC
	IDE Hard Disk Reset Switch
	Active LED
MSG (Message LED/ Power/ Sleep LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
PW (Power Switch)	Open: Normal Operation
	Close: Power On/Off
SPK (Speaker Connector)	Pin 1: VCC(+)
	Pin 2- Pin 3: NC
	Pin 4: Data(-)
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
RES (Reset Switch)	Open: Normal Operation
	Close: Reset Hardware System
NC	NC

English

- 15 - Hardware Installation Process