Standard CMOS Features
CMOS Setup
Standard CMOS Features
Date (mm:dd:yy) | Thu, Oct 7 2004 |
|
| Item Help | ||
Time (hh:mm:ss) | 22:31:24 |
|
| Menu Level` | ||
|
|
|
|
| Change the day, month, | |
` IDE Channel 0 Master | [None] |
|
| year |
| |
` IDE Channel 0 Slave | [None] |
|
|
|
| |
` IDE Channel 1 Master | [None] |
|
| <Week> | ||
` IDE Channel 1 Slave | [None] |
|
| Sun. to Sat. | ||
Drive A |
| [1.44M, 3.5"] |
| <Month> | ||
Drive B |
| [None] |
|
| Jan. to Dec. | |
Floppy 3 Mode Suport | [Disabled] |
|
| <Day> |
| |
|
|
|
|
|
| |
Halt On |
| [All, But Keyboard] |
| 1 to 31 (or maximum | ||
Base Memory |
| 640K |
|
| allowed in the month) | |
|
|
|
|
| ||
Extended Memory | 127M |
|
| <Year> |
| |
Total Memory |
| 128M |
|
| 1999 to 2098 | |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
F5: Previous Values | F6: | F7: Optimized Defaults | ||||
|
|
|
|
|
|
|
Date
The date format is <week>, <month>, <day>, <year>.
Week | The week, from Sun to Sat, determined by the BIOS and is display only |
Month | The month, Jan. Through Dec. |
Day | The day, from 1 to 31 (or the maximum allowed in the month) |
Year | The year, from 1999 through 2098 |
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave
IDE HDD
SATA devices setup. You can use one of three methods:
• | Auto | Allows BIOS to automatically detect IDE devices during POST. (Default value) |
• | None | Select this if no IDE devices are used and the system will skip the automatic |
|
| detection step and allow for faster system start up. |
• | Manual | User can manually input the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: | |
|
| CHS/LBA/Large/Auto(default:Auto) |
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.
Cylinder | Number of cylinders |
Head | Number of heads |
Precomp | Write precomp |
Landing Zone | Landing zone |
Sector | Number of sectors |
If a hard disk has not been installed, select NONE and press <Enter>.
English
- 21 - | BIOS Setup |