Gigabyte GA-K8NXP-SLI user manual Hard Disk Boot Priority, First / Second / Third Boot Device

English

2-2	Advanced BIOS Features
		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
			Advanced BIOS Features
`	Hard Disk Boot Priority		[Press Enter]		Item Help
	First Boot Device		[Floppy]		Menu Level`
	Second Boot Device		[Hard Disk]
	Third Boot Device		[CDROM]		Select Hard Disk Boot
	Boot Up Floppy Seek		[Disabled]		Device Priority
	Password Check		[Setup]
	Init Display First		[PEG]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
		F5: Previous Values		F7: Optimized Defaults

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.

Use <> or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

First / Second / Third Boot Device

Floppy	Select your boot device priority by Floppy.
LS120	Select your boot device priority by LS120.
Hard Disk	Select your boot device priority by Hard Disk.
CDROM	Select your boot device priority by CDROM.
ZIP	Select your boot device priority by ZIP.
USB-FDD	Select your boot device priority by USB-FDD.
USB-ZIP	Select your boot device priority by USB-ZIP.
USB-CDROM	Select your boot device priority by USB-CDROM.
USB-HDD	Select your boot device priority by USB-HDD.
Legacy LAN	Select your boot device priority by LAN.
Disabled	Select your boot device priority by Disabled.

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Enabled	BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS
	can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.
Disabled	BIOS will not search for the type of floppy disk drive by track number. Note that
	there will not be any warning message if the drive installed is 360K. (Default
	value)

GA-K8NXP-SLI Motherboard - 38 -