Gigabyte GA-K8NXP-SLI user manual ATX12V/ATX Power Connector

1/2) ATX_12V/ATX (Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly.

The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will not start.

Caution!

Please use a power supply that is able to handle the system voltage requirements. It is recommended that a power supply that can withstand high power consumption be used (300W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable system or a system that is unable to start.

If you use a 24-pin ATX power supply, please remove the small cover on the power connector on the motherboard before plugging in the power cord ; otherwise, please do not remove it.

		Pin No.	Definition
1	3	1	GND
2	4	2	GND
		3	+12V
		4	+12V

English

12	24
		Pin No.	Definition	Pin No.	Definition
		1	3.3V	13	3.3V
		2	3.3V	14	-12V
		3	GND	15	GND
		4	+5V	16	PS_ON(soft On/Off)
		5	GND	17	GND
		6	+5V	18	GND
		7	GND	19	GND
		8	Power Good	20	-5V
		9	5V SB(stand by +5V)	21	+5V
		10	+12V	22	+5V
1	13	11	+12V(Onlyfor24-pinATX)	23	+5V (Only for 24-pin ATX)
		12	3.3V(Onlyfor24-pinATX)	24	GND(Only for 24-pin ATX)

- 23 - Hardware Installation