English
Power Management Setup |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Power Management Setup |
|
| |
| ACPI Suspend Type | [S1(POS)] |
| Item Help | ||
| Menu Level` | |||||
| PME Event Wake Up | [Disabled] |
|
|
| |
| Modem Ring On | [Disabled] |
|
|
| |
| USB Resume from Suspend | [Disabled] |
|
|
| |
| [Disabled] |
|
|
| ||
x Day of Month Alarm | Everyday |
|
|
| ||
x | Time (hh:mm:ss) Alarm | 0 : 0 : 0 |
|
|
| |
| Power On By Mouse | [Disabled] |
|
|
| |
| Power On By Keyboard | [Disabled] |
|
|
| |
| AC BACK Function |
|
|
| ||
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
|
| F5: Previous Values |
| F7: Optimized Defaults |
| |
|
|
|
|
|
| |
| ACPI Suspend Type |
|
|
|
| |
| S1(POS) | Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) | ||||
| S3(STR) | Set ACPI suspend type to S3/STR(Suspend To RAM). |
| |||
|
|
|
|
|
| |
| Press power button then Power off instantly. (Default value) |
|
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed less than 4 sec.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled | Disable this function.(Default value) |
Enabled | Enable PME as wake up event. |
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled | Disable this function. (Default value) |
Enabled | Enable Modem Ring On function. |
USB Resume from Suspend
Disabled | Disable this function. (Default value) |
Enable | Enable USB device wake up system from suspend mode. |
Power-On by Alarm
You can set
Disabled | Disable this function. (Default value) | |
Enabled | Enable alarm function to POWER ON system. | |
If | ||
Day of Month Alarm : | Everyday, 1~31 | |
Time (hh: mm: ss) Alarm : | (0~23) : (0~59) : (0~59) |
- 44 - |