4. Capacity Check
Check the exact capacity of the connected Flash drive in the destination slots.
1.Plug the Flash drive into the slot and press OK on Capacity Check. The system will quickly report the exact capacity of the connected Flash drive by reporting either a green or red LED. Use the up and down arrows to move between slots.
2.This function supports Asynchronous operation. You can continuously remove and connect multiple Flash drive types without pushing any buttons.
NOTE:
a)This function may change the data and format on the Flash drive.
b)To protect the source drive’s data, the system does not check the capacity of the source drive.
c)If the red LED illuminates indicating an error, you can use the up and down arrows for error information.
5. Information
5.1 USB Info
Show the Flash drive’s basic information, such as drive type, content size, and total capacity.
Instruction Manual
8