StarTech.com USBDUP15 Utility, System Information, Do Format, FAT Format, 6.1.3 FAT32 Format

Page 12

5.2 System Information

5.2 System Information

This function will show information about the system, including model number and software version.

6. Utility

6.1 Do Format

Insert a Flash drive device into one of the destination slots and press OK to begin formatting.

1.This function will automatically detect the capacity of the Flash drive and format accordingly. If the Flash drive is already FAT16 or FAT32, the original format will not be changed.

2.If the Flash drive’s format is NTFS, Linux, or multi-partition FAT, the system will format the drive according to the capacity. If the capacity is equal or greater than 2GB, it will format to FAT32. If the capacity is less than 2GB, it will format to FAT16.

3.During the format process, you can press the up and down arrows to check each Flash drive’s formatting status, progress, and information.

6.1.2 FAT Format

Format any Flash drive to FAT16.

6.1.3 FAT32 Format

Format any Flash drive to FAT32.

NOTE: Only the Flash drive(s) in the destination ports will be formatted. The source will not be formatted.

Instruction Manual

9

Image 12

Contents 2m Mobile Charge Sync Micro USB Cable - A to Micro B USBDUP15DE Bedienungsanleitung - de.startech.com FR Guide de lutilisateur - fr.startech.comFCC Compliance Statement Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for helpProduct Diagram Hardware SetupWarranty Information IntroductionProduct Diagram Top ViewBack View Packaging Contents IntroductionSystem Requirements Hardware Setup User Menu Table of Contents Hardware Operation 1. Copy1.1 Synchronous Copy 1.2 Asynchronous Copy Operating Process2. Compare 3. Copy + Compareflashing and when there is an error red LED solid Automatically compares the Flash drive once the copy has completed4. Capacity Check 5. Information5.1 USB Info 6. Utility 5.2 System Information6.1 Do Format 6.1.2 FAT Format6.3.3 Setup Range 6.2 Measure Speed6.3 Media Check 6.3.1 H3 Safe 100%7. Setup 6.3.4 Setup Error Limit6.7 System Update 6.4 Quick Erase7.8 Power off time between Copy + Compare 7.2.2 Whole Media7.3 Button Beep 7.4 Asyn Hold time7.12 Restore Default 7.10 Working Mode7.11 Set HDD Mode Normal Mode default setting Faster Mode Fastest ModeWarranty Information Technical SupportLimitation of Liability Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise