Hardware Operation
1. Copy
There are two types of copy modes, Asynchronous Copy and Synchronous Copy. The system will check the content size of the source before executing the ‘copy’ function. If the source content size is less than the system’s buffer memory, it will automatically start an Asynchronous copy. If the source content size is larger than the system’s buffer memory, it will copy in Synchronous mode.
1.1 Synchronous Copy
To configure, go to function “7.6 Asynchronous” and select “Disable”. If the source’s content size is larger than system’s buffer memory, it will execute Synchronous Copy and ignore which copy mode has been set at function 7.6.
Operating Process
1.Plug in the source and destination Flash drive(s). Select the copy function and press OK.
2.The copy will start automatically if two destination Flash drives are connected. Otherwise, press OK to start the copy.
Instruction Manual
5