StarTech.com USBDUP15 manual Hardware Setup

Page 6

Hardware Setup

Note:

a)Before you begin ensure the power switch on the USBDUP15 is set to the off position.

b)The source or destination drives can be replaced with any SD/ SDHC/ Micro SD/ MMC/ Mini SD/ CF media card, using USB multimedia card reader (sold separately), or Hard Drive(HDD) / Solid State Drive (SSD) through a Hard Drive docking station or USB enclosure (sold separately).

1.Insert the source USB flash drive you would like to copy into the Source USB drive port on the USBDUP15.

2.Insert up to 5 destination USB flash drives (that you would like to be over written with the same data that is currently on the source drive) into the destination USB drive ports.

WARNING! Any DATA on the destination USB Flash drives will be overwritten.

3.Connect the power adapter port on the USBDUP15 to an available power source using the included Universal power adapter.

4.Set the power switch on the USBDUP15 to the on position.

5.The USBDUP15 is now is ready for operation as the user menu appears on the LCD display.

Instruction Manual

3

Image 6

Contents DE Bedienungsanleitung - de.startech.com 2m Mobile Charge Sync Micro USB Cable - A to Micro BUSBDUP15 FR Guide de lutilisateur - fr.startech.comIncrease the separation between the equipment and receiver FCC Compliance StatementReorient or relocate the receiving antenna Consult the dealer or an experienced radio/TV technician for helpWarranty Information Product DiagramHardware Setup IntroductionProduct Diagram Top ViewBack View Packaging Contents IntroductionSystem Requirements Hardware Setup User Menu Table of Contents Hardware Operation 1. Copy1.1 Synchronous Copy 1.2 Asynchronous Copy Operating Processflashing and when there is an error red LED solid 2. Compare3. Copy + Compare Automatically compares the Flash drive once the copy has completed4. Capacity Check 5. Information5.1 USB Info 6.1 Do Format 6. Utility5.2 System Information 6.1.2 FAT Format6.3 Media Check 6.3.3 Setup Range6.2 Measure Speed 6.3.1 H3 Safe 100%6.7 System Update 7. Setup6.3.4 Setup Error Limit 6.4 Quick Erase7.3 Button Beep 7.8 Power off time between Copy + Compare7.2.2 Whole Media 7.4 Asyn Hold time7.11 Set HDD Mode 7.12 Restore Default7.10 Working Mode Normal Mode default setting Faster Mode Fastest ModeWarranty Information Technical SupportLimitation of Liability Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise