StarTech.com USBDUP15 manual Working Mode, Set HDD Mode, Restore Default

Page 16

7.10 Working Mode

There are 5 duplication speeds:

•Slowest Mode

•Slower Mode

•Normal Mode (default setting)

•Faster Mode

•Fastest Mode

Change the duplication speed. Normal speed is recommended for most Flash drive types. If there is a high failure rate when duplicating, try lowering the speed.

7.11 Set HDD Mode

Choose ‘Active Mode’ to duplicate to USB Hard Disk Drives (HDD/SSD). Choose ‘Inactive Mode’ to duplicate USB Flash drives. Inactive mode is set by default.

7.12 Restore Default

Restore the system back to factory defaults.

Instruction Manual

Image 16

Contents 2m Mobile Charge Sync Micro USB Cable - A to Micro B USBDUP15DE Bedienungsanleitung - de.startech.com FR Guide de lutilisateur - fr.startech.comFCC Compliance Statement Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for helpProduct Diagram Hardware SetupWarranty Information IntroductionTop View Product DiagramBack View Introduction Packaging ContentsSystem Requirements Hardware Setup User Menu Table of Contents 1. Copy Hardware Operation1.1 Synchronous Copy 1.2 Asynchronous Copy Operating Process2. Compare 3. Copy + Compareflashing and when there is an error red LED solid Automatically compares the Flash drive once the copy has completed5. Information 4. Capacity Check5.1 USB Info 6. Utility 5.2 System Information6.1 Do Format 6.1.2 FAT Format6.3.3 Setup Range 6.2 Measure Speed6.3 Media Check 6.3.1 H3 Safe 100%7. Setup 6.3.4 Setup Error Limit6.7 System Update 6.4 Quick Erase7.8 Power off time between Copy + Compare 7.2.2 Whole Media7.3 Button Beep 7.4 Asyn Hold time7.12 Restore Default 7.10 Working Mode7.11 Set HDD Mode Normal Mode default setting Faster Mode Fastest ModeTechnical Support Warranty InformationLimitation of Liability Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise