Tripp Lite SU10KRT1X, SU10KRT3 owner manual Mounting Tower, Tower Mounting Procedure

4 – Mounting continued

4-4 Mounting (Tower)

Warning: When mounting the UPS system in a tower position, make sure the control panel is closer to the top of the cabinet than the bottom.

Note: The control panel can be rotated to match the UPS system’s position. Pull the panel out slightly, rotate it and push it back into place.

Tower Mounting Procedure

1Use M4 flat-head screws S2 to attach covers A5 to four of the tower feet A4 .

2Use M3 flat-head screws S1 to attach the tower feet A4 to the UPS power module and external battery pack as shown.

3With the aid of an assistant, place the cabinets in an upright position. Use M3 pan-head screws S5 to attach the stabilizing bracket A6 to the cabinets.

S2

1

S1

A4

A5

A4

S1

S5

A6

3

S1

A4

2 S1

7