Tripp Lite 1000 VA Matching Your Front Panel to Your Equipment, Rackmount, Desktop/Under-Monitor

Page 3

200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 3

Mounting

Matching Your Front Panel to Your Equipment

Your UPS ships with two front panels of different colors, one installed and one separate. If you want to swap your UPS’s front panel to better match the color of your other equipment, remove the installed front panel by first removing the four screws in its corners, then carefully removing the two screws that connect the UPS’s controls and LEDs to the inside of the front panel as shown in Figure 1. Connect the controls to the new front panel, then attach it to the UPS in place of the first.

Rackmount

Position brackets as shown in Figure 2 to serve as mounting ears for the UPS in your rack. Use 4 mounting screws to connect the UPS to each bracket. Mount the UPS in your rack with user-supplied screws and hardware appropriate to your rack. Have an assistant hold the UPS in position while mounting.

Desktop/Under-Monitor

Place on your desktop or under your computer monitor with the control and LED panel forward.

Figure 1—Panel Matching

Figure 2—Rackmount

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents SmartPro 1U Rackmount UPS Connection Warnings Important Safety InstructionsBattery Warnings UPS Location WarningsMatching Your Front Panel to Your Equipment RackmountDesktop/Under-Monitor Plug your UPS into an Electrical outlet Plug your equipment into Your UPSTurn your UPS on EPO Port Connection Connection optionalSerial Port Connection USB Port ConnectionButtons Front Panel Indicator Lights Front Panel AC Receptacles Other UPS Features Rear PanelInput Breaker Storage ServiceSMART750RM1U SMART1000RM1U Page Manual del propietario Advertencias sobre la conexión de equipos Instrucciones de seguridad importantesAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión del UPSColor del panel frontal en juego con sus equipos Montaje en rack bastidorSobre el escritorio o debajo del monitor Conecte su UPS en un Tomacorriente Conecte sus equipos con el UPSEncienda su UPS on Conexión de puerto EPO Conexión opcionalConexión con puerto serie Conexión con puerto USBBotones Panel frontal Luces indicadoras Panel frontal Operación básica continúaOtras funciones del UPS Panel posterior Norm Delay Servicio AlmacenamientoModelo 200210187
Top Page Image Contents