Tripp Lite 1000 VA owner manual Connection optional, Serial Port Connection, USB Port Connection

200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 5

Connection optional

Your UPS will function properly without these connections.

1Serial Port Connection

Using the serial cable provided, connect a serial port from a computer to a serial port on your UPS. Install on the computer the Tripp Lite power protection software appropriate to its operating system.

2USB Port Connection

Using the USB cable provided, connect a USB port from a computer to a USB port on your UPS. Install on the computer the Tripp Lite power protection software appropriate to its operating system.

			SMART1000RM1U
				1155 NYCE
			SNMP CONFIG.
ACC, SLOT	NORM DELAY
		EPO	1	2
	SEE MANUAL
1
			SMART1000RM1U

			1155 NYCE
			SNMP CONFIG.
ACC, SLOT
NORM DELAY	EPO	1	2
SEE MANUAL

2

3EPO Port Connection

Using the RJ-11 cable provided, connect the Emergency Power Off (EPO) port of your computer to a user-supplied normally closed or normally open switch according to the circuit diagram at the right. The EPO port is not a phone line surge suppressor; do not connect a phone line to this port.

		SMART1000RM1U
		SNMP CONFIG
ACC, SLOT
NORM DELAY	EPO	1
SEE MANUAL

3
OPTION 1: USER SUPPLIED NORMALLY CLOSED SWITCH
	2	2-3 JUPMER
RJ11	3	N.C. EPO SWITCH
	4
PLUG
	5
	NO CONNECTION
OPTION 2: USER SUPPLIED NORMALLY OPEN SWITCH
	2	N.O. EPO SWITCH
RJ11	3
	4
PLUG		NO CONNECTION
	5

EPO Circuit Diagrams

5