Tripp Lite B060-032-8 owner manual Click Install Certificate, Login Web

Page 15

10. Administrator Utility

To login to the B060-032-8 Administrator Utility:

Enter the IP address that you have just set up (http://192.168.1.xxx) for the B060-032-8 in the address bar of a Web browser and press ENTER. Note: If you do not know the IP address of the B060-032-8, ask your network administrator.

When you try to login to the B060-032-8 from your Web browser, a Security Alert message appears to inform you that the device’s certificate is not trusted, and asks if you want to proceed (Figure 2). The certificate can be trusted, but the alert is triggered because the certificate’s name is not found on Microsoft’s list of Trusted Authorities. You have two options:

(a)Ignore the warning and click Yes to go on. If you are working on a computer at another location, accept the certificate for just this session by clicking Yes.

(b)Install the certificate and have it be recognized as trusted. If you are working at your own computer, install the certificate on your computer (see next section). After the certificate is installed, it will be recognized as trusted.

To install the Security Certificate:

In the Security Alert dialog box, click View Certificate. The Certificate dialog box appears. Note: Upon opening the certificate, you will notice there is a red and white X logo over the certificate to indicate that it is not trusted.

Click Install Certificate.

Follow the Installation Wizard to complete the installation. Unless you have a specific reason to choose otherwise, accept the default options. The Wizard presents a caution screen to inform you that you are about to install a certificate from an outside authority.

Click Yes.

Click Finish to complete the installation. Click OK to close the dialog box.

The certificate is now trusted (Figure 3).

When you click View Certificate, the red and white X logo will no longer be present—further indication that the certificate is trusted.

Enter your username and password (default is ADMIN, ADMIN). The B060-032-8 Administrator Utility Main Web Page appears.

Figure 4: Login Web Page

Figure 2: Security Alert

Figure 3: Trusted Security Certificate

Figure 5: Administrator Utility Main Web Page

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Registration Model B060-032-8Introduction Table of ContentsRackmount Warnings Important Safety InstructionsInstallation Warnings Maintenance WarningsRequired Hardware System ComponentsCompatibility & Required Hardware CompatibilityUser Port LEDs FeaturesB060-032-8 Front View Server Port LEDsRackmounting Single-Level Installation Daisy-Chaining Multilevel InstallationCascading CascadingCascading B060-032-8 Matrix KVM Switches Cascading B007-008 KVM Switches Daisy-Chaining Administrator Utility Network InstallationBasic Operation Topology Considerations Setting the IP AddressManual IP Address LoggingLogin Web Click Install CertificateMenus & Icons Port Status Naming StationsColumn Description Setting the Web Page Session Timeout From the Administration menu, choose Station Management.Network Configuration IP Address IP Installer SettingGroup Management Setting Date and TimeGroup Management Web Page Modify Group Open the Group Management Web Page FigureUser type Permissions AdministratorSuper Administrator User ManagementUser Management Web Page Modify User Open the User Management Web Page FigureUser Management Web Page Delete User Accessing Ports Managing Port AccessPort Management Field Description Port Note Configuring Port SettingsPort OS Setting the OSD ViewRestoring KVM Port Defaults Field Description OS LanguageDisplay Duration View ModeOption Description Set Port IDScroll LOCK, Scroll Lock Configuring OSD User SettingsUpgrading Firmware Preparing to Upgrade FirmwareUpgrading Firmware via the B060-032-8 Administrator Utility Searching for Ports & StationsSelect Master Device Dialog Box Upgrading Firmware via the Firmware Upgrade UtilityFirmware Upgrade Utility Main Screen Replacing the Root B060-032-8 Upgrade FailedBacking Up & Restoring Settings Viewing & Ending User SessionsAction Active Sessions Web Viewing and Clearing the Log FileOSD Main Screen Viewing System Information & HelpLogging Out OSD OperationOSD Navigation Heading DescriptionType Accessing Switches & Computers To delete a shortcut Setting DescriptionOSD Functions To add a shortcutIdle Timeout Change PasswordTimeout Hotkey CommandTo change a user’s User Type Group Management Setting DescriptionTo change a user’s account password Management MenusTo grant port access to a user To grant port access to a groupTo set the Group Access Type To revoke group access for a portSystem Information To enable dynamic IP addressing with a Dhcp serverTo manually configure the IP Settings Station ManagementF5 SCH Hotkey ModeInvoking Hotkey Mode Hotkey Port SwitchingAuto Scanning Keyboard Emulation Hotkey Beeper ControlGeneral Troubleshooting Problem Solution TroubleshootingProduct Specifications Troubleshooting for Sun Systems Problem SolutionSpecifications Entering the ok Prompt Sun SolarisService Storage & ServiceWarranty & Warranty Registration Factory Default Settings

B060-032-8 specifications

The Tripp Lite B060-032-8 is an advanced KVM switch designed to simplify and enhance the management of multiple computers from a single interface. This device supports up to eight computers, making it ideal for environments such as server rooms, data centers, and heavy IT operations that require efficient controls over numerous systems.

One of the standout features of the B060-032-8 is its ability to support high-definition resolutions up to 1920x1200, allowing users to operate multiple systems seamlessly without sacrificing visual quality. The switch utilizes advanced video technology to ensure that display outputs remain clear, crisp, and lag-free, which is critical in environments where real-time monitoring and response are essential.

Moreover, the B060-032-8 supports both USB and PS/2 connections, granting flexibility in compatibility with a variety of computers and peripheral devices. This dual connection capability expands the scope of use, as users can effortlessly switch between different types of systems, whether they're running legacy software or the latest OS platforms.

Another technological highlight is the built-in firmware that ensures ease of use and stability. The switching process is facilitated via an intuitive front-panel push-button interface and includes keyboard hotkey commands, allowing users to toggle between connected computers with minimal disruption to their workflow. The inclusion of LED indicators provides clarity on which ports are active, enhancing overall situational awareness in critical operations.

Security is also a key component of the B060-032-8. The unit supports password protection features, ensuring that unauthorized users cannot easily access critical systems. This security feature is vital for environments where sensitive data is handled, offering peace of mind for IT administrators.

In terms of power efficiency, the Tripp Lite B060-032-8 is designed to operate with minimal power consumption, which is an important consideration for organizations looking to reduce energy costs while maintaining effective IT operations.

In conclusion, the Tripp Lite B060-032-8 KVM switch is an outstanding solution for managing multiple computers efficiently and effectively. With its wide compatibility, high-resolution support, user-friendly design, enhanced security features, and energy-efficient operation, it stands out as a valuable tool for IT professionals who demand high performance and reliability in their technology infrastructure. This KVM switch represents a smart investment for any organization aiming to streamline its operations while maximizing resource utilization and system management efficiency.
Top Page Image Contents