Tripp Lite owner manual Cascading B060-032-8 Matrix KVM Switches

Page 9

8. Multilevel Installation

Cascading B060-032-8 Matrix KVM Switches

Cascading B060-032-8 KVM switches off of B060-032-8 KVM switches is the preferred method of expanding the number of connected computers/servers, as it is the method that provides the most functionality. Cascaded B060-032-8 KVM Switches can support eight simultaneous users, whereas a daisy-chained B060-032 supports only four, a daisy-chained B060-016-2 supports only two and a cascaded B007-008 supports only one. To cascade off of the B060-032-8 Matrix KVM Switch, Follow these steps:

Before cascading additional B060-032-8 KVM switches, ensure that the firmware version of the B060-032-8 to be installed matches that of the first- level B060-032-8. B060-032-8 KVM switches with different firmware version numbers may be incompatible. See page 30 for more information on verifying the firmware version number.

Use Cat5 cable to connect up to eight KVM ports on the first-level B060-032-8 KVM switch to the eight user ports on the second-level B060-032-8 KVM switch. The number of KVM consoles on the first-level B060-032-8 that can simultaneously access the ports of cascaded KVM switches is limited by the number of connections between the parent and child KVM switches. If you only have one bus connection, only one of the consoles attached to the master B060-032-8 will be able to access the cascaded B060-032-8 at any given time. Without multiple bus connections, a console connected to the master

B060-032-8 Switch cannot access the cascaded switch unless there are no other consoles accessing the cascaded B060-032-8 at the same time. Repeat for each second-level and third-level B060-032-8 KVM switch that you wish to cascade. The distance between the first-level and last-level KVM switch cannot exceed 1,000 ft. (300m). The maximum distance between any two B060-032-8 cannot exceed 500 ft. (150m).

Use Cat5 cable to connect Server Interface Units (SIUs) to any available KVM ports and plug the connectors on the SIUs into the keyboard, video, and mouse ports of the computers/servers you wish to install.

Plug the power cable into the power socket of the first level B060-032-8, connect the power cable to a Tripp Lite Surge Suppressor, PDU or UPS System, then turn on the B060-032-8.

Wait one minute and repeat for each second-level B060-032-8.

Wait one minute and repeat for each third-level B060-032-8.

Plug the power adapter cables supplied with the Console Interface Units (CIUs) into the power jacks on the rear of the CIUs, and plug the power adapter into a Tripp Lite Surge Suppressor, PDU or UPS System.

Turn on the power to all connected computers/servers.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Registration Model B060-032-8Introduction Table of ContentsInstallation Warnings Important Safety InstructionsMaintenance Warnings Rackmount WarningsCompatibility & Required Hardware System ComponentsCompatibility Required HardwareB060-032-8 Front View FeaturesServer Port LEDs User Port LEDsRackmounting Single-Level Installation Cascading Multilevel InstallationCascading Daisy-ChainingCascading B060-032-8 Matrix KVM Switches Cascading B007-008 KVM Switches Daisy-Chaining Administrator Utility Network InstallationBasic Operation Topology Considerations Setting the IP AddressManual IP Address LoggingLogin Web Click Install CertificateMenus & Icons Port Status Naming StationsColumn Description Setting the Web Page Session Timeout From the Administration menu, choose Station Management.Network Configuration IP Address IP Installer SettingGroup Management Setting Date and TimeGroup Management Web Page Modify Group Open the Group Management Web Page FigureSuper Administrator AdministratorUser Management User type PermissionsUser Management Web Page Modify User Open the User Management Web Page FigureUser Management Web Page Delete User Accessing Ports Managing Port AccessPort Management Field Description Port Note Configuring Port SettingsRestoring KVM Port Defaults Setting the OSD ViewField Description OS Language Port OSOption Description View ModeSet Port ID Display DurationScroll LOCK, Scroll Lock Configuring OSD User SettingsUpgrading Firmware via the B060-032-8 Administrator Utility Preparing to Upgrade FirmwareSearching for Ports & Stations Upgrading FirmwareSelect Master Device Dialog Box Upgrading Firmware via the Firmware Upgrade UtilityFirmware Upgrade Utility Main Screen Replacing the Root B060-032-8 Upgrade FailedBacking Up & Restoring Settings Viewing & Ending User SessionsAction Active Sessions Web Viewing and Clearing the Log FileLogging Out Viewing System Information & HelpOSD Operation OSD Main ScreenOSD Navigation Heading DescriptionType Accessing Switches & Computers OSD Functions Setting DescriptionTo add a shortcut To delete a shortcutTimeout Change PasswordHotkey Command Idle TimeoutTo change a user’s account password Group Management Setting DescriptionManagement Menus To change a user’s User TypeTo set the Group Access Type To grant port access to a groupTo revoke group access for a port To grant port access to a userTo manually configure the IP Settings To enable dynamic IP addressing with a Dhcp serverStation Management System InformationF5 SCH Hotkey ModeInvoking Hotkey Mode Hotkey Port SwitchingAuto Scanning Keyboard Emulation Hotkey Beeper ControlGeneral Troubleshooting Problem Solution TroubleshootingSpecifications Troubleshooting for Sun Systems Problem SolutionEntering the ok Prompt Sun Solaris Product SpecificationsWarranty & Warranty Registration Storage & ServiceFactory Default Settings Service

B060-032-8 specifications

The Tripp Lite B060-032-8 is an advanced KVM switch designed to simplify and enhance the management of multiple computers from a single interface. This device supports up to eight computers, making it ideal for environments such as server rooms, data centers, and heavy IT operations that require efficient controls over numerous systems.

One of the standout features of the B060-032-8 is its ability to support high-definition resolutions up to 1920x1200, allowing users to operate multiple systems seamlessly without sacrificing visual quality. The switch utilizes advanced video technology to ensure that display outputs remain clear, crisp, and lag-free, which is critical in environments where real-time monitoring and response are essential.

Moreover, the B060-032-8 supports both USB and PS/2 connections, granting flexibility in compatibility with a variety of computers and peripheral devices. This dual connection capability expands the scope of use, as users can effortlessly switch between different types of systems, whether they're running legacy software or the latest OS platforms.

Another technological highlight is the built-in firmware that ensures ease of use and stability. The switching process is facilitated via an intuitive front-panel push-button interface and includes keyboard hotkey commands, allowing users to toggle between connected computers with minimal disruption to their workflow. The inclusion of LED indicators provides clarity on which ports are active, enhancing overall situational awareness in critical operations.

Security is also a key component of the B060-032-8. The unit supports password protection features, ensuring that unauthorized users cannot easily access critical systems. This security feature is vital for environments where sensitive data is handled, offering peace of mind for IT administrators.

In terms of power efficiency, the Tripp Lite B060-032-8 is designed to operate with minimal power consumption, which is an important consideration for organizations looking to reduce energy costs while maintaining effective IT operations.

In conclusion, the Tripp Lite B060-032-8 KVM switch is an outstanding solution for managing multiple computers efficiently and effectively. With its wide compatibility, high-resolution support, user-friendly design, enhanced security features, and energy-efficient operation, it stands out as a valuable tool for IT professionals who demand high performance and reliability in their technology infrastructure. This KVM switch represents a smart investment for any organization aiming to streamline its operations while maximizing resource utilization and system management efficiency.
Top Page Image Contents