Tripp Lite B060-032-8 SET Scan, Change Password, OSD Activation, SET Logout, Timeout, Mode

Page 40

11. OSD Operation

Setting

Description

SET SCAN

SCAN INTERVAL – Determines how long a KVM port is displayed for while in Auto Scan mode. Enter a value from 0-240

 

seconds and press the Enter key. The default is 5 seconds. A value of zero will automatically enter the B060-032-8 into Skip

 

Mode when Auto Scan is initiated.

SCAN MODE – Selects which computers will be accessed during an Auto Scan.

-PERSONAL – Scans only those KVM ports the user has set as personal.

-ACCESSIBLE – Scans only those KVM ports that the user has been given access to.

-ACCESSIBLE & POWERED – Scans only those KVM ports that the user has been given access to and that are powered on. The default is ACCESSIBLE & POWERED.

F3: SET

This function allows users to change their account passwords and set up and adjust their personal settings. A separate profile for each user is stored by the OSD and is activated according to the username that is provided during log in. The settings are explained in the following table:

Setting

Description

CHANGE PASSWORD

Enables the user to change their account password. When changing their password, the user will be required to type in the old

 

password, and then type in the new password twice. To confirm the changes press the Enter key, which will bring you back to

 

the previous screen. Blank passwords are acceptable.

OSD ACTIVATION

The user can select which Hotkey they wish to use, SCROLL LOCK or CTRL. This setting defaults at Scroll Lock.

SET LOGOUT

This setting allows the user to determine how much inactive time must pass before they are logged out of the B060-032-8,

TIMEOUT

requiring them to enter their password to regain access to the KVM switch. The user can enter a time from 1-180 minutes,

 

with zero deactivating this setting. This setting defaults at zero (disabled).

SCREEN BLANKER

This setting allows the user to determine how much inactive time must pass before the users screen goes blank, requiring

 

mouse activity to display the screen again. The user can key in a time from 1-30 minutes, with zero disabling this setting. This

 

setting defaults at zero (disabled).

HOTKEY COMMAND

This setting allows the user to enable/disable the Hotkey command mode. When disabled the user will need to access KVM

MODE

ports or perform functions solely via the OSD. This setting defaults at enabled.

SET BEEPER

This setting allows the user to turn the beeper On/Off. This setting defaults at On.

IDLE TIMEOUT

This setting allows the user to determine the amount of inactive time before the KVM port they are accessing is released for

 

use by other users. The user can set a time from 1-240 seconds, with zero disabling this setting. This setting defaults at 5

 

seconds.

RESTORE USER

This allows the user to restore the original factory default settings for the View and Set menus of their user profile.

DEFAULT

Note: Password is not affected.

 

 

F4: ADM

F4 is accessible only by Super Administrators and Administrators. It allows configuration and control of the overall operation of the OSD. Note: When creating user accounts, each user must be added to a group. It is recommended that groups be created before user accounts. If you do not wish to create groups you may add users to the default group account; however, the default group account cannot be used to grant port access to group members. In this case, you must individually add users to the KVM port(s).

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model B060-032-8 RegistrationTable of Contents IntroductionImportant Safety Instructions Installation WarningsMaintenance Warnings Rackmount WarningsSystem Components Compatibility & Required HardwareCompatibility Required HardwareFeatures B060-032-8 Front ViewServer Port LEDs User Port LEDsRackmounting Single-Level Installation Multilevel Installation CascadingCascading Daisy-ChainingCascading B060-032-8 Matrix KVM Switches Cascading B007-008 KVM Switches Daisy-Chaining Network Installation Administrator UtilityBasic Operation Setting the IP Address Topology ConsiderationsLogging Manual IP AddressClick Install Certificate Login WebMenus & Icons Naming Stations Port StatusColumn Description From the Administration menu, choose Station Management. Setting the Web Page Session TimeoutNetwork Configuration IP Installer Setting IP AddressSetting Date and Time Group ManagementOpen the Group Management Web Page Figure Group Management Web Page Modify GroupAdministrator Super AdministratorUser Management User type PermissionsOpen the User Management Web Page Figure User Management Web Page Modify UserUser Management Web Page Delete User Managing Port Access Accessing PortsPort Management Configuring Port Settings Field Description Port NoteSetting the OSD View Restoring KVM Port DefaultsField Description OS Language Port OSView Mode Option DescriptionSet Port ID Display DurationConfiguring OSD User Settings Scroll LOCK, Scroll LockPreparing to Upgrade Firmware Upgrading Firmware via the B060-032-8 Administrator UtilitySearching for Ports & Stations Upgrading FirmwareUpgrading Firmware via the Firmware Upgrade Utility Select Master Device Dialog BoxFirmware Upgrade Utility Main Screen Upgrade Failed Replacing the Root B060-032-8Viewing & Ending User Sessions Backing Up & Restoring SettingsAction Viewing and Clearing the Log File Active Sessions WebViewing System Information & Help Logging OutOSD Operation OSD Main ScreenHeading Description OSD NavigationType Accessing Switches & Computers Setting Description OSD FunctionsTo add a shortcut To delete a shortcutChange Password TimeoutHotkey Command Idle TimeoutGroup Management Setting Description To change a user’s account passwordManagement Menus To change a user’s User TypeTo grant port access to a group To set the Group Access TypeTo revoke group access for a port To grant port access to a userTo enable dynamic IP addressing with a Dhcp server To manually configure the IP SettingsStation Management System InformationHotkey Mode F5 SCHHotkey Port Switching Invoking Hotkey ModeAuto Scanning Hotkey Beeper Control Keyboard EmulationTroubleshooting General Troubleshooting Problem SolutionTroubleshooting for Sun Systems Problem Solution SpecificationsEntering the ok Prompt Sun Solaris Product SpecificationsStorage & Service Warranty & Warranty RegistrationFactory Default Settings Service

B060-032-8 specifications

The Tripp Lite B060-032-8 is an advanced KVM switch designed to simplify and enhance the management of multiple computers from a single interface. This device supports up to eight computers, making it ideal for environments such as server rooms, data centers, and heavy IT operations that require efficient controls over numerous systems.

One of the standout features of the B060-032-8 is its ability to support high-definition resolutions up to 1920x1200, allowing users to operate multiple systems seamlessly without sacrificing visual quality. The switch utilizes advanced video technology to ensure that display outputs remain clear, crisp, and lag-free, which is critical in environments where real-time monitoring and response are essential.

Moreover, the B060-032-8 supports both USB and PS/2 connections, granting flexibility in compatibility with a variety of computers and peripheral devices. This dual connection capability expands the scope of use, as users can effortlessly switch between different types of systems, whether they're running legacy software or the latest OS platforms.

Another technological highlight is the built-in firmware that ensures ease of use and stability. The switching process is facilitated via an intuitive front-panel push-button interface and includes keyboard hotkey commands, allowing users to toggle between connected computers with minimal disruption to their workflow. The inclusion of LED indicators provides clarity on which ports are active, enhancing overall situational awareness in critical operations.

Security is also a key component of the B060-032-8. The unit supports password protection features, ensuring that unauthorized users cannot easily access critical systems. This security feature is vital for environments where sensitive data is handled, offering peace of mind for IT administrators.

In terms of power efficiency, the Tripp Lite B060-032-8 is designed to operate with minimal power consumption, which is an important consideration for organizations looking to reduce energy costs while maintaining effective IT operations.

In conclusion, the Tripp Lite B060-032-8 KVM switch is an outstanding solution for managing multiple computers efficiently and effectively. With its wide compatibility, high-resolution support, user-friendly design, enhanced security features, and energy-efficient operation, it stands out as a valuable tool for IT professionals who demand high performance and reliability in their technology infrastructure. This KVM switch represents a smart investment for any organization aiming to streamline its operations while maximizing resource utilization and system management efficiency.
Top Page Image Contents