Tripp Lite B060-032-8 owner manual OSD Navigation, Heading Description, Type

Page 37

11. OSD Operation

After you login, the Welcome Screen will appear (Figure 39).

Press ENTER. A screen similar to the one below will appear (Figure 40).

Note: Figure 38 depicts the Super Administrator Main Screen. The User Main Screen does not depict the F4 function, since this is reserved for Super Administrators and Administrators. The OSD always starts in List view, with the highlight bar at the same position it was in the last time the OSD was closed. Only the KVM ports that have been set as accessible by a Super Administrator or Administrator for the currently logged in user are visible. Any switches or computers added to, disconnected from or rearranged in the installation will be auto-detected and the port list will be automatically updated.

Figure 39: Welcome Screen

 

 

Figure 40: Super Administrator Main Screen

OSD Main Screen Headings

 

 

 

 

Heading

 

Description

PN

 

This column lists the port numbers for all the KVM ports on the B060-032-8.

 

 

 

TYPE

 

This column lists the SIU connecting a computer/server to the B060-032-8. The designation MXCHAIN identifies

 

 

daisy-chained KVMs; the designation MXKVM identifies cascaded KVMs.

NOTE

 

This column lists the Port Note assigned to it or the model name of the KVM Switch Daisy-Chained to it.

 

 

 

11.2 OSD Navigation

Use the following procedures to navigate through OSD menus:

To close the main screen and deactivate the OSD, click the X at the upper right corner of the OSD window or press ESC on the keyboard.

To log out of the B060-032-8 click F8 at the top of the main screen, or press F8 on the keyboard.

To move up or down through the list one line at a time, click the up and down triangle symbols (▲▼) or use the [↑] and [↓] keys on the keyboard.

To move up or down through the list one screen at a time, click the Up and Down Arrow Symbols (↑↓) or use the PAGE UP and PAGE DOWN keys on the keyboard.

After executing any action, you automatically go back to the menu one level above.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Registration Model B060-032-8Introduction Table of ContentsInstallation Warnings Important Safety InstructionsMaintenance Warnings Rackmount WarningsCompatibility & Required Hardware System ComponentsCompatibility Required HardwareB060-032-8 Front View FeaturesServer Port LEDs User Port LEDsRackmounting Single-Level Installation Cascading Multilevel InstallationCascading Daisy-ChainingCascading B060-032-8 Matrix KVM Switches Cascading B007-008 KVM Switches Daisy-Chaining Network Installation Administrator UtilityBasic Operation Topology Considerations Setting the IP AddressManual IP Address LoggingLogin Web Click Install CertificateMenus & Icons Naming Stations Port StatusColumn Description From the Administration menu, choose Station Management. Setting the Web Page Session TimeoutNetwork Configuration IP Address IP Installer SettingGroup Management Setting Date and TimeGroup Management Web Page Modify Group Open the Group Management Web Page FigureSuper Administrator AdministratorUser Management User type PermissionsUser Management Web Page Modify User Open the User Management Web Page FigureUser Management Web Page Delete User Managing Port Access Accessing PortsPort Management Field Description Port Note Configuring Port SettingsRestoring KVM Port Defaults Setting the OSD ViewField Description OS Language Port OSOption Description View ModeSet Port ID Display DurationScroll LOCK, Scroll Lock Configuring OSD User SettingsUpgrading Firmware via the B060-032-8 Administrator Utility Preparing to Upgrade FirmwareSearching for Ports & Stations Upgrading FirmwareSelect Master Device Dialog Box Upgrading Firmware via the Firmware Upgrade UtilityFirmware Upgrade Utility Main Screen Replacing the Root B060-032-8 Upgrade FailedViewing & Ending User Sessions Backing Up & Restoring SettingsAction Active Sessions Web Viewing and Clearing the Log FileLogging Out Viewing System Information & HelpOSD Operation OSD Main ScreenHeading Description OSD NavigationType Accessing Switches & Computers OSD Functions Setting DescriptionTo add a shortcut To delete a shortcutTimeout Change PasswordHotkey Command Idle TimeoutTo change a user’s account password Group Management Setting DescriptionManagement Menus To change a user’s User TypeTo set the Group Access Type To grant port access to a groupTo revoke group access for a port To grant port access to a userTo manually configure the IP Settings To enable dynamic IP addressing with a Dhcp serverStation Management System InformationF5 SCH Hotkey ModeHotkey Port Switching Invoking Hotkey ModeAuto Scanning Keyboard Emulation Hotkey Beeper ControlGeneral Troubleshooting Problem Solution TroubleshootingSpecifications Troubleshooting for Sun Systems Problem SolutionEntering the ok Prompt Sun Solaris Product SpecificationsWarranty & Warranty Registration Storage & ServiceFactory Default Settings Service

B060-032-8 specifications

The Tripp Lite B060-032-8 is an advanced KVM switch designed to simplify and enhance the management of multiple computers from a single interface. This device supports up to eight computers, making it ideal for environments such as server rooms, data centers, and heavy IT operations that require efficient controls over numerous systems.

One of the standout features of the B060-032-8 is its ability to support high-definition resolutions up to 1920x1200, allowing users to operate multiple systems seamlessly without sacrificing visual quality. The switch utilizes advanced video technology to ensure that display outputs remain clear, crisp, and lag-free, which is critical in environments where real-time monitoring and response are essential.

Moreover, the B060-032-8 supports both USB and PS/2 connections, granting flexibility in compatibility with a variety of computers and peripheral devices. This dual connection capability expands the scope of use, as users can effortlessly switch between different types of systems, whether they're running legacy software or the latest OS platforms.

Another technological highlight is the built-in firmware that ensures ease of use and stability. The switching process is facilitated via an intuitive front-panel push-button interface and includes keyboard hotkey commands, allowing users to toggle between connected computers with minimal disruption to their workflow. The inclusion of LED indicators provides clarity on which ports are active, enhancing overall situational awareness in critical operations.

Security is also a key component of the B060-032-8. The unit supports password protection features, ensuring that unauthorized users cannot easily access critical systems. This security feature is vital for environments where sensitive data is handled, offering peace of mind for IT administrators.

In terms of power efficiency, the Tripp Lite B060-032-8 is designed to operate with minimal power consumption, which is an important consideration for organizations looking to reduce energy costs while maintaining effective IT operations.

In conclusion, the Tripp Lite B060-032-8 KVM switch is an outstanding solution for managing multiple computers efficiently and effectively. With its wide compatibility, high-resolution support, user-friendly design, enhanced security features, and energy-efficient operation, it stands out as a valuable tool for IT professionals who demand high performance and reliability in their technology infrastructure. This KVM switch represents a smart investment for any organization aiming to streamline its operations while maximizing resource utilization and system management efficiency.
Top Page Image Contents