Tripp Lite B060-032-8 owner manual Configuring OSD User Settings, Scroll LOCK, Scroll Lock

Page 29

10. Administrator Utility

Configuring OSD User Settings

This function allows the user to change the account password and set up a unique working environment. A separate profile for each user is stored by the OSD and is activated according to the username that is provided during login. Open the Settings Web Page by clicking on the Settings link (Figure 23).

 

Figure 23: Settings Web Page

 

 

Option

Description

 

 

Change Password

Enter the old account password. Enter a new password and then re-enter it to confirm it. Blank passwords are permitted.

 

Don’t enter anything if you wish to leave the password as is.

 

 

OSD Activation

Allows you to choose between 2 different Hotkeys, (SCROLL LOCK, SCROLL LOCK) or (CTRL, CTRL). The default is

 

(SCROLL LOCK, SCROLL LOCK).

Set Logout Timeout

Sets the amount of time without activity before the user is logged out of the OSD. If there is no input from the user for the

 

specified amount of time, the user will be logged out and required to enter their username and password to regain access.

 

Choose a value from 1-180 minutes. A value of zero disables this option. Default is zero (disabled).

 

 

Screen Blanker

If there is no input from the KVM console for the amount of time set here, the screen is blanked. Enter a value from 1-30

 

minutes. A value of zero disables this option. Default is zero (disabled).

 

 

Hotkey Command

Enables/Disables the Hotkey Command. Default is Enabled.

 

 

Set Beeper

Turns the beeper On/Off. The beeper sounds whenever the KVM port is switched and when activating Auto Scan mode.

 

Default is On.

Set Idle Timeout

If there is no input from the KVM console accessing a particular port within the set amount of time, the KVM port is

 

released to be used by other users. Enter a value from 0-240 seconds. A value of zero disables this option. Default is

 

5 seconds.

Restore User Default

Restores the original factory default settings for View Mode (OSD), Set Port ID, Display Duration, Set Scan, OSD

 

Activation, Set Logout Timeout, Screen Blanker, Hotkey Command, Set Beeper and Set Idle Timeout. Note: Password is

 

not affected.

 

 

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Registration Model B060-032-8Introduction Table of ContentsInstallation Warnings Important Safety InstructionsMaintenance Warnings Rackmount WarningsCompatibility & Required Hardware System ComponentsCompatibility Required HardwareB060-032-8 Front View FeaturesServer Port LEDs User Port LEDsRackmounting Single-Level Installation Cascading Multilevel InstallationCascading Daisy-ChainingCascading B060-032-8 Matrix KVM Switches Cascading B007-008 KVM Switches Daisy-Chaining Basic Operation Administrator UtilityNetwork Installation Topology Considerations Setting the IP AddressManual IP Address LoggingLogin Web Click Install CertificateMenus & Icons Column Description Port StatusNaming Stations Network Configuration Setting the Web Page Session TimeoutFrom the Administration menu, choose Station Management. IP Address IP Installer SettingGroup Management Setting Date and TimeGroup Management Web Page Modify Group Open the Group Management Web Page FigureSuper Administrator AdministratorUser Management User type PermissionsUser Management Web Page Modify User Open the User Management Web Page FigureUser Management Web Page Delete User Port Management Accessing PortsManaging Port Access Field Description Port Note Configuring Port SettingsRestoring KVM Port Defaults Setting the OSD ViewField Description OS Language Port OSOption Description View ModeSet Port ID Display DurationScroll LOCK, Scroll Lock Configuring OSD User SettingsUpgrading Firmware via the B060-032-8 Administrator Utility Preparing to Upgrade FirmwareSearching for Ports & Stations Upgrading FirmwareSelect Master Device Dialog Box Upgrading Firmware via the Firmware Upgrade UtilityFirmware Upgrade Utility Main Screen Replacing the Root B060-032-8 Upgrade FailedAction Backing Up & Restoring SettingsViewing & Ending User Sessions Active Sessions Web Viewing and Clearing the Log FileLogging Out Viewing System Information & HelpOSD Operation OSD Main ScreenType OSD NavigationHeading Description Accessing Switches & Computers OSD Functions Setting DescriptionTo add a shortcut To delete a shortcutTimeout Change PasswordHotkey Command Idle TimeoutTo change a user’s account password Group Management Setting DescriptionManagement Menus To change a user’s User TypeTo set the Group Access Type To grant port access to a groupTo revoke group access for a port To grant port access to a userTo manually configure the IP Settings To enable dynamic IP addressing with a Dhcp serverStation Management System InformationF5 SCH Hotkey ModeAuto Scanning Invoking Hotkey ModeHotkey Port Switching Keyboard Emulation Hotkey Beeper ControlGeneral Troubleshooting Problem Solution TroubleshootingSpecifications Troubleshooting for Sun Systems Problem SolutionEntering the ok Prompt Sun Solaris Product SpecificationsWarranty & Warranty Registration Storage & ServiceFactory Default Settings Service

B060-032-8 specifications

The Tripp Lite B060-032-8 is an advanced KVM switch designed to simplify and enhance the management of multiple computers from a single interface. This device supports up to eight computers, making it ideal for environments such as server rooms, data centers, and heavy IT operations that require efficient controls over numerous systems.

One of the standout features of the B060-032-8 is its ability to support high-definition resolutions up to 1920x1200, allowing users to operate multiple systems seamlessly without sacrificing visual quality. The switch utilizes advanced video technology to ensure that display outputs remain clear, crisp, and lag-free, which is critical in environments where real-time monitoring and response are essential.

Moreover, the B060-032-8 supports both USB and PS/2 connections, granting flexibility in compatibility with a variety of computers and peripheral devices. This dual connection capability expands the scope of use, as users can effortlessly switch between different types of systems, whether they're running legacy software or the latest OS platforms.

Another technological highlight is the built-in firmware that ensures ease of use and stability. The switching process is facilitated via an intuitive front-panel push-button interface and includes keyboard hotkey commands, allowing users to toggle between connected computers with minimal disruption to their workflow. The inclusion of LED indicators provides clarity on which ports are active, enhancing overall situational awareness in critical operations.

Security is also a key component of the B060-032-8. The unit supports password protection features, ensuring that unauthorized users cannot easily access critical systems. This security feature is vital for environments where sensitive data is handled, offering peace of mind for IT administrators.

In terms of power efficiency, the Tripp Lite B060-032-8 is designed to operate with minimal power consumption, which is an important consideration for organizations looking to reduce energy costs while maintaining effective IT operations.

In conclusion, the Tripp Lite B060-032-8 KVM switch is an outstanding solution for managing multiple computers efficiently and effectively. With its wide compatibility, high-resolution support, user-friendly design, enhanced security features, and energy-efficient operation, it stands out as a valuable tool for IT professionals who demand high performance and reliability in their technology infrastructure. This KVM switch represents a smart investment for any organization aiming to streamline its operations while maximizing resource utilization and system management efficiency.
Top Page Image Contents