Orion 2000 manual Contents

Page 2

Contents
1. BEFORE YOU BEGIN	5
Understand the Cable Modem’s Features	5
Contact Your Local Cable Operator	5
Prepare Your Area for Cable Modem Installation	6
Gather Supplied and Required Items	6
2. INSTALLING THE CABLE MODEM USING THE USB PORT	7
Installing the Hardware	10
Installing the Software Drivers	11
Installing the Software Drivers in Windows 98 SE Operating System	11
Installing the Software Drivers in Windows Me Operating System	16
Installing the Software Drivers in Windows 2000 Operating System	19
Installing the Software Drivers in Windows XP Operating System	22
Troubleshooting the USB Installation	25
Uninstalling the USB Driver	27
3. INSTALLING THE MODEM USING THE ETHERNET PORT	27
Installing the Hardware	28
Troubleshooting the Ethernet Installation	28
4. CABLE MODEM LEDS AND CONNECTORS	29
LEDs on the Front of the Modem	30
Connectors on the Back of the Modem	30
5. TELNET COMMANDS	32
User’ Guide	2

Image 2

Contents Orion Contents Mode of Operation Docsis Configuration File Vsif TAG Support Contact Your Local Cable Operator Understand the Cable Modem’s FeaturesBefore You Begin Supplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items Not SuppliedInstalling the Cable Modem Using the USB Port Installing the Software Drivers Before Hardware ConnectionPage Page Installing the Hardware Installing the Software Drivers User’ Guide User’ Guide Page Page Page User’ Guide Page Page User’ Guide Page Page Page User’ Guide Troubleshooting the USB Installation None of the LEDs is on when I power on the LAN Cable ModemSelect USB Composite Device and click Remove Click Refresh Installing the Modem Using the Ethernet Port Uninstalling the USB DriverEnet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Cable Modem LEDs and Connectors Connectors on the Back of the Modem LEDs on the Front of the ModemPage Telnet commands Getting HelpCMshow interTab CMshow interface Redisplaying a command CMshow ?Debug Image PingPassword ¾ show version ¾ show dhcpCMshow dhcp CMshow version¾ show interface ethernet ¾ show interfaceCMshow interface ? CMshow interface ethernetCMshow interface usb CMshow running-configuration¾ show interface usb Qpsk ¾ show cpe-info Display CPE information ¾ show downstream Display downstream informationCMshow downstream ¾ show nat configCMshow nat config ¾ show upstream¾ show nat time CMshow nat timer¾ show access-list ¾ show user¾ nvram factory-default CMshow access-list¾ show pppoe-forwarding Display PPPoE enable or disable ¾ show cpe-limitCM dhcp ip-pool add 192.168.100.2 CMshow dhcp CMtftp server¾ dhcp dns delete 1~4/all ¾ dhcp ip-pool delete 1-20/all ¾ dhcp gateway ip address Set Dhcp gateway ip addressOne to one mapping CMnat static ipmapping add 68.5.203.16Port forwarding setting ¾ nat static ipmapping delete index/allCMnat static portmapping delete CMnat static ip disableCMnat static ip enable NAT static ipInterfaces ¾ interface ethernet startup ¾ interface cable startup¾ rip timer expire second Set routing entry expire time ¾ rip version 1/2/2b¾ rip default CMrip key-chain 1 10 start-time 2002-4-20Web-access CMaccess-list 41 permit 00d0.5921.3354 ffff.ffff.ffffCMcopy tftpconfig 68.5.203.15 4ips.txt ¾ access-list delete list IDall¾ pppoe-forwarding enabledisable Optional ¾ reset¾ quit Disconnect telnet NAT mode Mode of OperationBridge mode ¾ ip nat enableRouting mode ¾ ip route enableNAT/Routing mode ¾ ip natroute enableUser’ Guide Web User Interface Home Accessing the Web User InterfaceWeb User Interface Cable Modem InformationCable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log NAT/Router configuration Bridge ModeWAN Interface NAT Mode Gateway LAN InterfaceReset SubmitRouter Mode Routing Protocol LAN Interface Delete Key ChainAdd Submit NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Submit Gateway LAN Setup Page Docsis configuration file Vsif tag support Meaning