Orion 2000 manual Mode of Operation

Page 3

Debug	34
Undebug	34
Image	35
Ping	35
Password	36
User-Level	36
Show	36
NVRAM	44
TFTP	44
DHCP	45
NAT	47
One to one mapping	47
Port forwarding setting	48
NAT static ip	49
NAT static gateway	49
Interfaces	50
IP	52
RIP	52
Web-access	54
Access-list	54
PPPoE-Forwarding	55
Copy	55
Cpe-limit	55
Wirte	55
Reset	55
Quit	56
6. MODE OF OPERATION	57
Bridge mode	57
User’ Guide	3

Image 3

Contents Orion Contents Mode of Operation Docsis Configuration File Vsif TAG Support Understand the Cable Modem’s Features Before You BeginContact Your Local Cable Operator Not Supplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items SuppliedInstalling the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Hardware Installing the Software Drivers User’ Guide User’ Guide Page Page Page User’ Guide Page Page User’ Guide Page Page Page User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB InstallationSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet PortTroubleshooting the Ethernet Installation None of the LEDs are on when I power on the Cable ModemEnet LED on my cable modem is not lit Cable Modem LEDs and Connectors LEDs on the Front of the Modem Connectors on the Back of the ModemPage Getting Help Telnet commandsCMshow ? CMshow interTab CMshow interface Redisplaying a commandDebug Ping ImagePassword CMshow version ¾ show dhcpCMshow dhcp ¾ show versionCMshow interface ethernet ¾ show interfaceCMshow interface ? ¾ show interface ethernetCMshow running-configuration ¾ show interface usbCMshow interface usb Qpsk ¾ show downstream Display downstream information ¾ show cpe-info Display CPE information¾ show upstream ¾ show nat configCMshow nat config CMshow downstream¾ show user CMshow nat timer¾ show access-list ¾ show nat time¾ show cpe-limit CMshow access-list¾ show pppoe-forwarding Display PPPoE enable or disable ¾ nvram factory-defaultCMtftp server ¾ dhcp dns delete 1~4/allCM dhcp ip-pool add 192.168.100.2 CMshow dhcp ¾ dhcp gateway ip address Set Dhcp gateway ip address ¾ dhcp ip-pool delete 1-20/allCMnat static ipmapping add 68.5.203.16 One to one mapping¾ nat static ipmapping delete index/all Port forwarding settingNAT static ip CMnat static ip disableCMnat static ip enable CMnat static portmapping deleteInterfaces ¾ interface cable startup ¾ interface ethernet startup¾ rip version 1/2/2b ¾ rip timer expire second Set routing entry expire timeCMrip key-chain 1 10 start-time 2002-4-20 ¾ rip defaultCMaccess-list 41 permit 00d0.5921.3354 ffff.ffff.ffff Web-access¾ reset ¾ access-list delete list IDall¾ pppoe-forwarding enabledisable Optional CMcopy tftpconfig 68.5.203.15 4ips.txt¾ quit Disconnect telnet ¾ ip nat enable Mode of OperationBridge mode NAT mode¾ ip route enable Routing mode¾ ip natroute enable NAT/Routing modeUser’ Guide Cable Modem Information Accessing the Web User InterfaceWeb User Interface Web User Interface HomeCable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode NAT/Router configurationSubmit NAT Mode Gateway LAN InterfaceReset WAN InterfaceRouter Mode Routing Protocol LAN Interface Key Chain AddDelete Submit NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Submit Gateway LAN Setup Page Meaning Docsis configuration file Vsif tag support