Orion 2000 manual ¾ show cpe-info Display CPE information

Page 41

RIP expire time: 180 seconds

RIP garbage time: 120 seconds

TFTP Server IP address : 24.196.48.38

Cable Modem IP address : 10.54.5.186

Configuration file : cbn-2000-512-3cpe.cm

Lease time : 604800 (secs)

UTC time offset : 14400 (secs)

Router IP address : 10.54.4.1

SubnetMask : 255.255.252.0

DHCP server : enable

Router DHCP server IP range from 24.196.57.13 to 24.196.57.14

DNS server(1) 24.196.48.39

DNS server(2) 24.196.48.40

DHCP server lease time : 1800

DHCP Domain Name option : disable.

Web access control

CPE interface web access enable.

Cable interface web access enable.

Access List is empty

PPPoE forwarding disable.

Number of CPE limitation

MAC address limit: unlimited

IP address limit: unlimited

¾show cpe-info Display CPE information

Example:
CM>show cpe-info
MAC	IP	Port
0002.8A0E.E674	0.0.0.0	USB
0800.465B.69B2	192.168.100.2	Ethernet

¾show downstream Display downstream information

User’ Guide

41

Image 41

Contents Orion Contents Mode of Operation Docsis Configuration File Vsif TAG Support Contact Your Local Cable Operator Understand the Cable Modem’s FeaturesBefore You Begin Gather Supplied and Required Items Prepare Your Area for Cable Modem InstallationSupplied Not SuppliedInstalling the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Hardware Installing the Software Drivers User’ Guide User’ Guide Page Page Page User’ Guide Page Page User’ Guide Page Page Page User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB InstallationSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet PortEnet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Cable Modem LEDs and Connectors LEDs on the Front of the Modem Connectors on the Back of the ModemPage Getting Help Telnet commandsCMshow ? CMshow interTab CMshow interface Redisplaying a commandDebug Ping ImagePassword CMshow dhcp ¾ show dhcp¾ show version CMshow versionCMshow interface ? ¾ show interface¾ show interface ethernet CMshow interface ethernetCMshow interface usb CMshow running-configuration¾ show interface usb Qpsk ¾ show downstream Display downstream information ¾ show cpe-info Display CPE informationCMshow nat config ¾ show nat configCMshow downstream ¾ show upstream¾ show access-list CMshow nat timer¾ show nat time ¾ show user¾ show pppoe-forwarding Display PPPoE enable or disable CMshow access-list¾ nvram factory-default ¾ show cpe-limitCM dhcp ip-pool add 192.168.100.2 CMshow dhcp CMtftp server¾ dhcp dns delete 1~4/all ¾ dhcp gateway ip address Set Dhcp gateway ip address ¾ dhcp ip-pool delete 1-20/allCMnat static ipmapping add 68.5.203.16 One to one mapping¾ nat static ipmapping delete index/all Port forwarding settingCMnat static ip enable CMnat static ip disableCMnat static portmapping delete NAT static ipInterfaces ¾ interface cable startup ¾ interface ethernet startup¾ rip version 1/2/2b ¾ rip timer expire second Set routing entry expire timeCMrip key-chain 1 10 start-time 2002-4-20 ¾ rip defaultCMaccess-list 41 permit 00d0.5921.3354 ffff.ffff.ffff Web-access¾ pppoe-forwarding enabledisable Optional ¾ access-list delete list IDallCMcopy tftpconfig 68.5.203.15 4ips.txt ¾ reset¾ quit Disconnect telnet Bridge mode Mode of OperationNAT mode ¾ ip nat enable¾ ip route enable Routing mode¾ ip natroute enable NAT/Routing modeUser’ Guide Web User Interface Accessing the Web User InterfaceWeb User Interface Home Cable Modem InformationCable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode NAT/Router configurationReset NAT Mode Gateway LAN InterfaceWAN Interface SubmitRouter Mode Routing Protocol LAN Interface Delete Key ChainAdd Submit NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Submit Gateway LAN Setup Page Meaning Docsis configuration file Vsif tag support