Example:
CM>show access-list
Access List |
| |
ID | Control | Address |
41 | Permit | 00D0.5900.0000, hardware address mask FFFF.FF00.0000 |
42 | Permit | 0008.0E00.0000, hardware address mask FFFF.FF00.0000 |
1 | Permit | 192.168.100.0, wildcard bits 0.0.0.16 |
21 | Permit | 64.168.39.0, wildcard bits 0.0.0.8 |
¾show cpe-limit
Display maximum of IP and MAC addresses are allowed behind the cable router
Example:
CM>show cpe-limit
MAC address limit: 29 MAC address
IP address limit: 29 IP address
¾show pppoe-forwarding Display PPPoE enable or disable.
Example:
CM>show pppoe-forwarding
NVRAM
¾nvram factory-default
Restore cable modem to factory default.
TFTP
¾tftp filename {file name}
Set the file name of the firmware image to download.
Example:
CM>tftp filename ram.cpr
User’ Guide | 44 |