Orion 2000 manual ¾ nat static ipmapping delete index/all, Port forwarding setting

LAN SETUP :

Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.224

NAT DHCP Server Pool Table :

NAT DHCP server support		20 IP pools
NAT DHCP server support		512 IP, Created 20 IP
Pool Index	Begin IP	End IP

1192.168.100.1 192.168.100.21 Provision assigned DNS 68.4.16.30

Provision assigned DNS 68.6.16.30

DHCP server lease time : 1800

IP Mapping Table:
Index Global IP	Local IP

168.5.203.16 192.168.100.22

¾nat static ipmapping delete {index/all}

Remove NAT one to one mapping entry from the IP Mapping Table

index: The index number IP Mapping Table (see “show nat config”command )

Port forwarding setting

¾nat static portmapping add {index }{ private ipaddress} {port}{protocol} Set NAT/PAT Port forwarding table

Example:

CM>nat static portmapping add 21 192.168.100.23 ftp

CM>show nat config NAT : Enable

WAN SETUP :

NAT public IP configuration : Manually

Static NAT public IP address : 68.5.203.15 Subnet Mask : 255.255.254.0

Static NAT public Gateway IP address : 68.5.202.1

LAN SETUP :

Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.224

NAT DHCP Server Pool Table :

NAT DHCP server support				20 IP pools
NAT DHCP server support				512 IP, Created 20 IP
Pool Index		Begin IP		End IP
1	192.168.100.1		192.168.100.21

DNS server(1) 68.6.16.30

DHCP server lease time : 1800

User’ Guide 48