NPort 5400 Series User’s Manual | Web Console Configuration |
ATTENTION
Refer to Chapter 3, “Initial IP Address Configuration,” to see how to configure the IP address. Examples shown in this chapter use the Factory Default IP address (192.168.127.254).
The NPort 5410/5430/5430I/5450/5450I homepage will open. On this page, you can see a brief description of the Web Console’s nine function groups.
ATTENTION
If you can’t remember the password, the ONLY way to start configuring the NPort is to load factory defaults by using the Reset button located near the NPort’s RJ45 Ethernet port.
Remember to use NPort Administrator to export the configuration file when you have finished the configuration. After using the Reset button to load factory defaults, your configuration can be easily reloaded into the NPort by using the NPort Administrator Import function. Refer to Chapter 6 for more details about using the Export and Import functions.
ATTENTION
If your NPort application requires using password protection, you must enable the cookie function in your browser. If the cookie function is disabled, you will not be allowed to enter the Web Console Screen.