Configuring Board and Port
If you already have installed the driver and want to
1.Click on the Taskbar [Start] [MOXA Utilities] menu and Panel] icon.
button, then select [Programs] menu, then then [Moxa Smartio/Industio Configuration
2.The Smartio/Industio configuration panel will be popped up. Please see steps 5- 7 in the previous Section “Installing Driver” for more details.
In this configuration panel, you may:
•Click [Property] to enter “Property” dialog box to configure the selected board with the correct “COM Number”, “INT Vector”, “Interrupt no” and “Base I/O Port Address”. Please see steps 5 to 7 in the previous section, “Installing Driver”, for more details, except that the “Board Type” field is not supposed to be changed.
•Click [Add] to add one more board that is not yet configured in the system. Please see steps 5 to 7 in the previous section, “Installing Driver”, for more details.
•Click [Remove] to remove the board currently selected from the configured board list.
•Click [OK] to confirm the configuration changes you made.
•Click [Cancel] to leave the dialog with the configuration unchanged.