Moxa Technologies C168P Windows 95/98, Updating Driver, Removing Driver, Software Installation

Software Installation

Updating Driver

To update the driver for the C168P boards, simply remove the driver, as described in the next section, and reinstall it as detailed in section, “Installing Driver”.

Removing Driver

To remove the driver for the C168P boards,

1.Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.

2.Select “MOXA Smartio/Industio Family Adapter” in the adapter list, then click on the [Remove] button and the [OK] button to remove the driver.

3.Restart the system to activate the new configuration.

Windows 95/98

Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully integrate the advanced features of Windows 95/98, multi-process and multi-thread, pure 32-bit Windows 95/98 virtual device port drivers (VxD) compliant with communication drivers (VCOMM) are developed for the C168P and other MOXA multiport boards. The drivers conform to the Win32 COMM API standard.

•To install the driver for the first time driver, please go directly to the section, “Installing Driver”.

•If you already have installed the driver and want to re-configure the board and port, add more boards or delete boards, please refer to the section, “Configuring Board and Port”.

•To update or remove driver, please go to the sections, “Updating Driver” and “Removing Driver”.

C168P User’s Manual 3-9