Schneider Electric 750VA operation manual Specifications, Installation, Operating Conditions

Page 5

Specifications

Operating Conditions

This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the unit and External Battery Packs (XLBP).

Do not operate the UPS where there is excessive dust, or the temperature or humidity are outside the specified limits.

This unit has front and rear air vents. Allow adequate space for proper ventilation.

Environmental Specifications

Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short duration discharges will shorten battery life.

For additional specifications, see the APC Web site at www.apc.com.

Temperature

Operating

0° to 40° C (32° to 104° F)

 

 

Storage

-15° to 45° C (5° to 113° F)

 

 

charge UPS battery every six months

 

 

 

 

 

Maximum

Operating

3,000 m (10,000 ft)

Elevation

 

 

Storage

15,000 m (50,000 ft)

 

 

 

Humidity

0% to 95% relative humidity, non-condensing

Installation

UPS

For UPS installation information, see the Smart-UPS X-Series Quick-Start guide that is included with the UPS. The guide is also available on the enclosed CD and the APC Web site at www.apc.com.

Network Management Card

For installation information, see the user manual provided with the Network Management Card (NMC). The user manual is also available on the APC Web site at www.apc.com.

External Battery Pack

For installation information, see the Smart-UPS X-Series External Battery Pack Installation guide that is included with the external battery pack. The guide is also available on the enclosed CD and the APC Web site at www.apc.com.

2

Smart-UPS X-Series Operation

Page 4 Page 6
Image 5
Page 4 Page 6
Contents
UPS Overview Smart-UPS Factory Warranty Overview SafetyAbout the UPS Product OverviewInstallation SpecificationsEnvironmental Specifications Network Management Card External Battery PackBasic Connections OperationConnect Equipment to the UPS Display Interface Using the display interfaceOverview Standard MenusAdvanced Menus UPS Settings ConfigurationStart-up Settings General SettingsControllable Outlet Groups Model-specific Controllable Outlet Groups Using the Controllable Outlet Groups and UPS outlets Network Management Card Settings EPO Overview Emergency Power OffNormally open contacts Normally closed contactsUPS does not provide expected backup time TroubleshootingDisplay interface indicators flash sequentially UPS is emitting an audible beeping soundDisplay interface has a Site Wiring Fault message Problem and Possible CauseReplace battery LED is illuminated Service Service and SupportTransport the UPS APC Worldwide Customer SupportLimited Warranty Smart-UPS Factory WarrantyApplicable Council Harmonized StandardsDirectives Type of Equipment Model Numbers990-3458-001 06/2009
Related manuals
Manual 20 pages 20.93 Kb