Schneider Electric 750VA Display Interface, Overview, Using the display interface, Standard Menus

Page 7

Display Interface

Overview

Online indicator

UPS Output On/Off button  On Battery indicator

 Fault indicator

 Replace Battery indicator  Display screen

 UP/DOWN buttons  ENTER button  ESCAPE button

Using the display interface

APC by Schneider Electric

su0343a

Use UP and DOWN to scroll through the main menu options. Press ENTER to view the sub-menus under each main menu option. Press ESCAPE to exit a sub-menu and return to a main menu.

Standard Menus

The Standard menus are the most commonly used menus for the UPS.

Menu

General Functions

 

 

Status

View basic information about the UPS:

 

• Operating mode

 

• Controllable Outlet state, On or Off

 

• Efficiency of the UPS

 

• Information about the load

 

• Battery capacity

 

• Estimated runtime

 

• Input and output voltage and frequency

 

• Information about the last transfer to battery power

 

• Self-test results

Configuration Configure the settings for the UPS:

•Language

•Local power quality: Good, Fair, Poor

•Choose Standard or Advanced menus

•LCD Display mode, Always On or Power-Saving

•Audible alarms

•Reset to Factory Defaults

Test & Diags Use the Test & Diags menu to have the UPS perform a self-test.

4

Smart-UPS X-Series Operation

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
UPS Overview Smart-UPS Factory Warranty Product Overview SafetyOverview About the UPSNetwork Management Card External Battery Pack SpecificationsInstallation Environmental SpecificationsConnect Equipment to the UPS OperationBasic Connections Standard Menus Using the display interfaceDisplay Interface OverviewAdvanced Menus General Settings ConfigurationUPS Settings Start-up SettingsControllable Outlet Groups Model-specific Controllable Outlet Groups Using the Controllable Outlet Groups and UPS outlets Network Management Card Settings Normally closed contacts Emergency Power OffEPO Overview Normally open contactsUPS is emitting an audible beeping sound TroubleshootingUPS does not provide expected backup time Display interface indicators flash sequentiallyReplace battery LED is illuminated Problem and Possible CauseDisplay interface has a Site Wiring Fault message APC Worldwide Customer Support Service and SupportService Transport the UPSLimited Warranty Smart-UPS Factory WarrantyModel Numbers Harmonized StandardsApplicable Council Directives Type of Equipment990-3458-001 06/2009
Related manuals
Manual 20 pages 20.93 Kb