Schneider Electric Comprehensive Guide for TSXETG100 Setup and Configuration

Page 5

63230-319-211A1

 

 

ConneXiumEthernet Gateway

2/2006

 

 

Setup

 

 

 

SETUP

To access the Setup web page links, click Setup on the ETG menu bar.

Ethernet and TCP/IP Settings

 

 

 

 

 

Action

Result

 

 

 

 

 

1.

From the Setup page, click Ethernet &

Opens the Ethernet & TCP/IP page.

 

 

TCP/IP.

 

 

 

 

 

 

2.

Select your frame format and media type.

Selects the frame format and media type.

 

 

Contact your network administrator if you

 

 

 

do not know.

 

 

 

 

 

 

3.

Enter your IP address, subnet mask, and

Enters the Ethernet parameters for the ETG.

 

 

default gateway address assigned to your

NOTE: If you enter an IP address that is used

 

 

ETG by your network administrator.

 

 

by another device, you will be prompted to

 

 

 

 

 

 

select a new IP address. See “Duplicate IP

 

 

 

Address Detection” on page 6.

 

 

 

 

 

4.

Click Apply.

Updates the ETG Ethernet and TCP/IP

 

 

 

settings.

 

 

 

 

* See Table 2 on page 5 for a list of options.

NOTE: After making changes to the Ethernet parameters and clicking

Apply, the ETG will reboot.

Figure 2: Ethernet & TCP/IP Page

Table 2: ETG Ethernet and TCP/IP Settings

Option

Description

 

Setting

 

 

 

Frame Format

Used to select the format for data sent over

Ethernet II, 802.3 SNAP

 

an Ethernet connection.

Default: Ethernet II

 

 

 

 

 

 

Media Type

Used to define the physical Ethernet

10T/100Tx Auto

 

connection or media type.

10BaseT-HD

 

 

10BaseT-FD

 

 

100BaseTX-HD

 

 

100BaseTX-FD

 

 

Default: 10T/100Tx Auto

 

 

 

IP Address

Used to enter the static IP address of the

0.0.0.0 to 255.255.255.255

 

ETG.

Default: 169.254.0.10

 

 

 

 

 

Subnet Mask

Used to enter the Ethernet IP subnet mask

0.0.0.0 to 255.255.255.255

 

address of your network.

Default: 255.255.0.0

 

 

 

 

 

Default Gateway

Used to enter the gateway (router) IP

0.0.0.0 to 255.255.255.255

 

address used for wide area network (WAN)

Default: 0.0.0.0

 

communications.

 

 

ENGLISH

© 2006 Schneider Electric. All Rights Reserved.

5

Image 5
Contents ConneXium Ethernet Gateway TSXETG100 Table of ContentsIntroduction Address Resolution Protocol ARP ARP is used to convert IPSupported Ethernet Protocols HardwareAdditional Resources Accessing the ETG Over a NetworkLogging into the ETG Logging OutDiagnostics SetupETG User Interface Overview ETG static web pagesEthernet and TCP/IP Settings Setup63230-319-211A1 ConneXium Ethernet Gateway 2006 Setup Option Description SettingScenario Duplicate IP Detected Power/Status LED ConneXium Ethernet Gateway 63230-319-211A1 Setup 2006Duplicate IP Address Detection Duplicate IP Detection ScenariosDefault Master 2006 SetupDefault Even Default 3 secondsMaster Mode Device List Setup Master Mode Topology For master mode usage of the COM portDevice List Before you begin, keep in mind the followingSlave Mode Topology Slave Mode Device List SetupEthernet Connection ETG RS485ConneXium Ethernet Gateway Setup ETG accounts and passwordsAccount Default Password User AccountsGroup Access Web Page AccessGroup Access AccessModbus TCP/IP Filtering TCP/IP Filtering Check Enable FilteringParameters Snmp ParametersConneXium Ethernet Gateway 63230-319-211A1 Diagnostics 2006 DiagnosticsStatistics Menu barInterpreting Statistics 2006 DiagnosticsStatistic Description EthernetGateway Information ConneXium Ethernet Gateway DiagnosticsSerial Port Read Device Registers ETG Read Device Register SettingsOption Description Default Finding the Firmware Version FirmwareGetting New Firmware Updating the Firmware FileDeutsch
Related manuals
Manual 2 pages 58.14 Kb