ConneXium™ Ethernet Gateway
Diagnostics
ENGLISH
| |
| 2/2006 |
|
|
Statistic | Description |
|
|
Serial Port |
|
|
|
Frames Sent | A counter that increments each time a frame is |
| sent. |
|
|
Frames Received | A counter that increments each time a frame is |
| received. |
|
|
CRC Errors | A counter that increments each time a |
| message is received that has a CRC that does |
| not match what is calculated. Typically the |
| result of wiring issues. |
|
|
Protocol Errors | A counter that increments each time an ill- |
| formed message is received. |
|
|
Timeouts | A counter that increments each time a request |
| message is sent without receiving a |
| corresponding response message within the |
| allowed time. Timeouts are typically the result |
| of configuration errors or a |
| device. |
|
|
Inbound Read Messagesd | A counter that increments each time a read |
| request message is received. |
|
|
Outbound Read Messagesc | A counter that increments each time a read |
| request message is sent. |
|
|
Inbound Write Messagesd | A counter that increments each time a write |
| request message is received. |
|
|
Outbound Write Messagesc | A counter that increments each time a write |
| request message is sent. |
|
|
Gateway Information |
|
|
|
Firmware Version | The firmware version that is installed on the |
| ETG. |
|
|
System Idle Time | A percentage from 0% to 100% indicating the |
| average processor time that is not being used. |
|
|
MAC Address | The unique Ethernet hardware address of an |
| ETG. |
|
|
Serial Number | The serial number of the ETG. |
|
|
Model Number | The ETG model number (100). |
|
|
Hardware Version | ETG hardware version. |
|
|
Manufacture Date | Date the ETG was manufactured. |
|
|
cAvailable when the serial port is in Master mode.
dAvailable when the serial port is in Slave mode
16 | © 2006 Schneider Electric. All Rights Reserved. |