Pelco Dx8000 manual Reconnect the Data and Power Cables, Installing CD-RW Data Cable

Page 20

RECONNECT THE DATA AND POWER CABLES

IMPORTANT: Data and power connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.

1.Connect the CD-RW drive to the system motherboard using the data cable that came with your DX8000:

a.Connect the gray connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in Figure 16.

b.Tuck out of the way the black connector of the data cable that came with your DX8000. This part of the cable will not be connected to a drive.

c.Connect the blue connector of the data cable to the Secondary (black) IDE connector on the system motherboard. Refer to Figure 16.

1b

1a

1c

Figure 16. Installing CD-RW Data Cable

18

C1607M (6/04)

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DX8000 Page Tools Needed Parts ListIntroduction Removing Power Cord from Wall Getting ReadyRemoving Power Cord from Unit ESD Protection Preparing Unit for Drive Installation Open the Unit ChassisRemoving Chassis Cover Component Layout DX8000 InteriorMove the Front Cross-Brace Removing Front Cross-BracePlacing Front Cross-Brace Across Rear of Unit Disconnect the Data Cable and Power Wire Removing IDE Data CablesRemoving Hard Drive Power Connection Remove the Drive Mount Baskets Removing Hard Drive BasketInstall an Additional Drive Prepare the DrivesMount the Additional Drive Inserting Drives into Basket Replacing Drive Basket SET the Master / Slave Jumpers Setting Drive Jumpers Reconnect the Data and Power Cables Installing CD-RW Data CableInstall Hard Drive Data Cables Installing Hard Drive Power Connectors Reassemble the Unit Replacing Front Cross-BraceReplacing Chassis Cover Restarting Unit Preparing the New Drives to Store Data Opening List of DrivesSelecting Allocation Option for Each Drive Format Warning Dialog Box C1607M 6/04 C1607M 6/04 Product Warranty and Return Information ISO9001
Related manuals
Manual 36 pages 35.01 Kb Manual 10 pages 26.21 Kb Manual 40 pages 3.7 Kb Manual 1 pages 21.57 Kb
Top Page Image Contents