Pelco Dx8000 manual Install Hard Drive Data Cables

Page 21

2.Using the straight data cable that came with your upgrade kit, connect Hard Drive 1 and Hard Drive 2 to the system motherboard:

a.Connect the straight data cable to Hard Drive 1 and Hard Drive 2 according to the example shown in Figure 17.

b.Connect the straight data cable to the primary (blue) IDE connector on the system motherboard. Refer to Figure 17.

2a

2b

Figure 17. Install Hard Drive Data Cables

C1607M (6/04)

19

Image 21
Contents DX8000 Page Parts List IntroductionTools Needed Getting Ready Removing Power Cord from WallRemoving Power Cord from Unit ESD Protection Open the Unit Chassis Preparing Unit for Drive InstallationRemoving Chassis Cover DX8000 Interior Component LayoutRemoving Front Cross-Brace Move the Front Cross-BracePlacing Front Cross-Brace Across Rear of Unit Removing IDE Data Cables Disconnect the Data Cable and Power WireRemoving Hard Drive Power Connection Removing Hard Drive Basket Remove the Drive Mount BasketsPrepare the Drives Install an Additional DriveInserting Drives into Basket Mount the Additional DriveReplacing Drive Basket SET the Master / Slave Jumpers Setting Drive Jumpers Installing CD-RW Data Cable Reconnect the Data and Power CablesInstall Hard Drive Data Cables Installing Hard Drive Power Connectors Replacing Front Cross-Brace Reassemble the UnitReplacing Chassis Cover Restarting Unit Opening List of Drives Preparing the New Drives to Store DataSelecting Allocation Option for Each Drive Format Warning Dialog Box C1607M 6/04 C1607M 6/04 Product Warranty and Return Information ISO9001
Related manuals
Manual 36 pages 35.01 Kb Manual 10 pages 26.21 Kb Manual 40 pages 3.7 Kb Manual 1 pages 21.57 Kb