Network Technologies CAT5 Installation with USB devices, RearViewof PRIMUX-UZRUserStation

Page 11

			6pinminiDIN
			femaleconnectors
				RearViewof
			PRIMUX-UZRUserStation
				PS/2	R NETWORK	1275DannerDr Tel:330-562-7070
5VDC			USB		TECHNOLOGIESAurora,OH44202Fax:330-562-1999
5VDC			USB	Devices	NTINCORPORATED	www.nti1.com
-2A			Devices	SUN
-2A	+	RS232	Devices	Mouse Kybd Devices	Cat5	Monitor
+

15HDfemale videoconnector

15HDmale videoconnector

	6miniDIN
	maleconnectors
			VGA
	PS/2		Multi-Scan
	PS/2	PS/2Keyboard	Monitor
	Mouse		Monitor

Figure 6- Connect the Extended PS/2 components to the User Station

Installation with USB devices

1.Position the User Station such that the CAT5 cable, the monitor cable, device cables, and the AC adapter power connector can each reach the User Station without cable strain.

2.Connect the monitor cable to the female 15HD video connector on the User Station.

3.Connect the USB device(s) to the User Station (see Fig. 7).

a.Connect the keyboard to a USB Type A female connector on the User Station.

b.Connect the mouse to the other USB Type A female connector on the User Station.

USBTypeAfemale	15HDfemale
deviceports	videoconnector
PRIMUX-UZRUserStation

			PS/2
5VDC		USB	Devices
-2A +		Devices	SUN
-2A +	RS232	Devices	Mouse Kybd Devices

+

	R NETWORK	1275DannerDr Tel:330-562-7070
	TECHNOLOGIESAurora,OH44202Fax:330-562-1999
NTI
	NCORPORATED	www.nti1.com

Cat5 Monitor

15HDmale videoconnector

USBTypeAmale

	USB	USB Keyboard
	Mouse	USB Keyboard
	Mouse

Figure 7- Connect extended USB components to the User Station

VGA

Multi-Scan

Monitor

7

Image 11

Contents Primux Trademark Table of Contents Typical Application Warranty InformationMaterials IntroductionNTI Features and FunctionsDefinitions Preparation for InstallationHost Adapter InstallationInstallation of a PS/2 CPU CPU Installation of a USB CPUInstallation of a SUN CPU User Station Connecting the CAT5 cable to the Host AdapterInstallation with PS/2 devices RearViewof PRIMUX-UZRUserStation Installation with USB devicesRearViewofPRIMUX-UZRUserStation Connecting the CAT5 cable to the User StationPower Up for the first time USB HA-USB SUN HA-SUN Daisy-Chained Host AdaptersAdding a Host Adapter to a segment HA-PS2Initial Startup Using the Primux CAT5 KVM SwitchUser Rights vs. Administrator Rights Hot PluggingQuick Connect Change the Default Administrator PasswordAdministrator Login and Password Setup Host AdaptersSecurity Standards of OperationKeypad Control User Login User Access FunctionsAdministrator Login AutologinFunction Enter Administration Mode Administrator only- seeNormal Mode Scan ModeFunction Description Settings MenuFunction Keystroke Value or Action Find Host AdapterHost Adapter Info screen Help Pages OSD Settings MenuFunction Description Keystroke Host Adapters for ScanChange Scan Dwell Time Video Quality AdjustmentAdministration Menu AdministrationHost Adapter List Edit Hosts, Users, and User Station InfoFunction Keystroke Confirmation Parameter Value Required Edit Host AdapterUser List User ListEdit User User InfoFunction Keystroke Parameter Value Add New UserHost Access List Edit User PasswordEdit User Station Change Administrators PasswordSelect Autologon User Use with care, all user configuration Settings will be lostUser Station Info screen Idle TimeoutAlternate OSD screen Alternate OSD KeyFunction Description Keystroke Confirmation Required Update Firmware/Bootloader MenuAcquire/Send DDC Info Configure MAC Host AdaptersSelect Keyboard Language menu Select Keyboard LanguageDistance feet Technical SpecificationsInterconnection Cable Wiring Method Pin Wire Color Pair FunctionCTS RTS DSR DTR DCD Mating Face 25D Male Connector Female ConnectorNull Modem Cable Pinouts Function Source Keystroke Sequence Safety and EMC Regulatory StatementsMenu QUICK-FIND Keystroke Table Warranty Information