Network Technologies CAT5 operation manual Select Autologon User

To edit the User Station Info use the commands and enter the desired parameter values as defined in the chart below:

Function	Keystroke	Confirmation	Parameter Value
		Required
Modify the name	N	No	String, 16 characters max., case
			sensitive
Modify the Comment Field	C	No	String, 32 characters max., case
			sensitive
Modify the Autologon to select the user to	A	No	None. Brings up Select User menu.
be automatically logged in at power up
Reset User Station internal data	R	Yes	None
Default values will be restored.
Use with care, all user configuration
settings will be lost.
Delete all Host Adapters from the segment	H	Yes	None
Delete all users	U	Yes	None
Display the User Station info	I	No	None
Return to Edit Menu	X or Esc	No	None

Select Autologon User

From the Edit User Station menu, press <A> to bring up the Select User Menu. (From Command Mode type <A> - <E> - <S> - <A>.)

Figure 34- Select user for Autologon

To select which user will be automatically logged in when the User Station is powered up, choose one of the actions listed below:

Function	Description	Keystroke
Enter	Select the user indicated by the selection bar	Enter
Info	Display info on the selected user	I
None	Choose not to have any users logged on at power up. This will	N
	bring up the Login screen at power up instead of a user menu.
Exit	Return to Edit User Station Menu	X or Esc

29