Network Technologies CAT5 operation manual User Station Info screen, Idle Timeout

User Station Info screen

To display the user station information screen, press <I> from the Edit User Station screen (pg 28). (From Command Mode press <A> - <E> - <S> - <I>.)

This screen displays the following information:

Item	Description
Name	The name of the User Station
Comment	could be used to decribe the location
	of the User Station
Unique ID	a value unique to the segment
Master ID	the segment 's Master ID
AutoLogon	If set to a valid user number this user
	will be automatically logged on at
	power up
Type/	Product type and ROM version, used
Revision	for identification puroposes
CodeCRC	ROM CRC, use for identification
	purposes
UstatID	An internal serial number

Figure 35- User Station Info screen

Function

Return to the Edit User Station screen

Keystroke

X or Esc

Idle Timeout

Selects the idle time in minutes. xxx= time in minutes from 1 to 255. (From Command Mode press <A>-<I>.) Use 0 to disable this feature. When the user is idle (no keyboard or mouse activity) for the selected number of minutes, the user will be logged out and have to log back in. The user may either enter a value using the numeric keypad, increment/decrement the value using arrows, or click on the arrows on the screen. Functions for the available keystrokes are shown below.

Function	Keystroke
Increment value by 1	Up arrow
Decrement value by 1	Down Arrow
Increment value by 10	Page Up
Decrement value by 10	Page Down
Minimum value	Home
Maximum value	End
Disable feature (assigns value 0)	D
Save new value	S or Enter
Esc	X or Esc
		Figure 36- Idle Timeout screen

30