Network Technologies CAT5 operation manual Host Adapter, Installation of a PS/2 CPU

Page 8

INSTALLATION

The Host Adapter

The PRIMUX HA Host Adapter is designed to support PS/2, SUN, and USB CPUs. For PS/2 CPUs use HA-PS2, for SUN CPUs use HA-SUN, and for USB CPUs use HA-USB. Before installing or removing a Host Adapter, power down the CPU to be connected/disconnected and disconnect the power cord from the CPU.

CAUTION! DAMAGE MAY OCCUR TO THE CPU AND HOST ADAPTER IF POWER IS NOT DISCONNECTED BEFORE CONNECTING OR DISCONNECTING CABLES.

Installation of a PS/2 CPU

Plug the cables of the HA-PS2 Host Adapter into the back of the CPU after disconnecting the power cord from the CPU. (See Fig. 2.)

a) Connect the purple 6 pin miniDIN cable end with the keyboard symbol on it to the keyboard port on the back of the CPU.

PS/2 Keyboard

b) Connect the green 6 pin miniDIN cable end with the mouse symbol on it to the mouse port on the back of the CPU.

PS/2 Mouse

c)Connect the blue 15HD cable end to the VGA port on the back of the CPU.

6miniDIN maleconnectors

6pinminiDIN femaleconnectors

purple-keyboard

green-mouse

HA-PS2

(FrontView)

	15HDfemale	15HDmale
	videoconnector	15HDmale
	videoconnector	videoconnector
		videoconnector
		RearViewofPS/2CPU

Figure 2- Connect a HA-PS2 Host Adapter to a PS/2 CPU

4

Image 8

Contents Primux Trademark Table of Contents Warranty Information Typical ApplicationIntroduction MaterialsFeatures and Functions NTIPreparation for Installation DefinitionsHost Adapter InstallationInstallation of a PS/2 CPU CPU Installation of a USB CPUInstallation of a SUN CPU User Station Connecting the CAT5 cable to the Host AdapterInstallation with PS/2 devices Installation with USB devices RearViewof PRIMUX-UZRUserStationRearViewofPRIMUX-UZRUserStation Connecting the CAT5 cable to the User StationPower Up for the first time Daisy-Chained Host Adapters Adding a Host Adapter to a segmentHA-PS2 USB HA-USB SUN HA-SUNUsing the Primux CAT5 KVM Switch User Rights vs. Administrator RightsHot Plugging Initial StartupChange the Default Administrator Password Administrator Login and PasswordSetup Host Adapters Quick ConnectSecurity Standards of OperationKeypad Control User Access Functions Administrator LoginAutologin User LoginEnter Administration Mode Administrator only- see FunctionScan Mode Normal ModeSettings Menu Function DescriptionFunction Keystroke Value or Action Find Host AdapterHost Adapter Info screen OSD Settings Menu Help PagesHost Adapters for Scan Function Description KeystrokeVideo Quality Adjustment Change Scan Dwell TimeAdministration Administration MenuEdit Hosts, Users, and User Station Info Host Adapter ListEdit Host Adapter Function Keystroke Confirmation Parameter Value RequiredUser List User ListUser Info Edit UserAdd New User Function Keystroke Parameter ValueEdit User Password Host Access ListChange Administrators Password Edit User StationUse with care, all user configuration Settings will be lost Select Autologon UserIdle Timeout User Station Info screenAlternate OSD Key Alternate OSD screenUpdate Firmware/Bootloader Menu Function Description Keystroke Confirmation RequiredConfigure MAC Host Adapters Acquire/Send DDC InfoSelect Keyboard Language Select Keyboard Language menuTechnical Specifications Interconnection Cable Wiring MethodPin Wire Color Pair Function Distance feetCTS RTS DSR DTR DCD Mating Face 25D Male Connector Female ConnectorNull Modem Cable Pinouts Function Source Keystroke Sequence Safety and EMC Regulatory StatementsMenu QUICK-FIND Keystroke Table Warranty Information