Mirroring the Preinstalled Windows Server 2003 R2 OS with LSI RAID
The Windows Server 2003 R2 OS supports hardware RAID and cannot be installed on an existing array if one has been created. Refer to the Sun Fire X4150 Server OS Installation Guide or an HBA card product guide.
If you choose the preinstalled Windows Server 2003 R2 OS and want to make the OS part of a RAID set, and if you are using LSI RAID only, perform the following procedure to update the preinstalled Windows Server 2003 R2 OS to a mirrored RAID set. As stated in TABLE
This example allows the creation of a mirror before or after the Windows Server 2003 R2 installation. The server has 2 disks: HDD0 (with the OS) and HDD1 (which is blank).
To create a mirror image of the Windows Server 2003 R2 OS on HDD1:
1.Power on your server system for the first time.
2.Press
3.Select the SAS card - SAS1068E. Press Enter.
4.Choose RAID Properties.
5.Create an IM (Integrated Mirror) for the required disk configuration.
6.Select the hard disks to be used. Use the right arrow to move the cursor to the RAID column, and press the Space bar to include into RAID.
7.Because HDD0 contains data, select merge or delete:
■Choose M to merge data and start a sync operation.
■Choose D to erase the Windows Server 2003 R2 PreInstall.
8.Press C to create the RAID and start the sync operation.
9.Click Exit to save the configuration and close the menu.
10.Press Esc to exit the configuration utility and reboot.