Disassembling Slide-Rails
Do one of the following procedures before installation:
■“Disassembling Bolt-OnSlide-Rails” on page 12
■“Disassembling Tool-lessSlide-Rails” on page 13
Disassembling Bolt-On Slide-Rails
To remove the mounting-brackets from the bolt-on slide-rail assemblies:
1.Unpack the slide-rails.
2.Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown in FIGURE 2-1.
3.Squeeze and hold the tabs at the top and bottom of the lock while you pull the mounting-bracket out of the slide-rail assembly until it reaches the stop. (See
FIGURE 2-1).
4.Push the mounting-bracket release button toward the front of the mounting- bracket, as shown in FIGURE 2-1, and simultaneously withdraw the mounting- bracket from the slide-rail assembly.
12 Sun Fire X4150 Installation Guide • January 2008
