Sun Microsystems X4150 Server manual Installing the Intel Proset Teaming Utility

■8N1: eight data bits, no parity, one stop bit

■9600 baud

■Disable hardware flow control (CTS/RTS)

■Disable software flow control (XON/XOFF)

e.Connect a null serial modem cable from the server’s back panel RJ45 serial port to a terminal device (if not connected already).

See FIGURE 1-5for the serial port position.

f.Press Enter on the terminal device to establish a connection between the terminal device and the Embedded LOM service processor (SP).

The following prompt appears. ->

3.Use a pencil, or other pointed object, to press and release the recessed Power button on the server front panel.

When main power is applied to the server, the Power/OK LED next to the Power button lights and remains lit.

4.To display a screen for installing the preinstalled Solaris OS from the system management port, perform the following sub-steps:

a.Type cd /SP/AgentInfo

b.Type start Console

5.Install and configure the software, as required.

Note – To switch back to the Embedded LOM command-line interface from the serial console, press Esc + Shift + 9, or press Esc ( , depending on your keyboard location.

Installing the Intel PROSET Teaming Utility.

To install the Intel PROSET Teaming Utility.

1.Install the Ethernet drivers from the Tools & Drivers CD Version 1.1, using your preferred method.

40 Sun Fire X4150 Installation Guide • January 2008