Sun Microsystems 150 manual Installing a Secondary Hard Drive

CD/DVD-ROM drive

IDE cable connector

1 2

IDE 1 (J504)

Secondary hard drive

3 4

FIGURE 5 Installing a Secondary Hard Drive

10.Verify that the secondary IDE cable connector is connected to riser board connector IDE2 (J503). See FIGURE 7.

Note – Ensure that the cables are properly oriented by aligning the connector keys.

11.Verify that the CD-ROM or DVD-ROM cable is connected to the primary (IDE1, J504) cable connector labeled CD/DVD (FIGURE 5 and FIGURE 6).

12.Connect the hard drive IDE cable connector labeled “Primary HDD” to the primary hard drive.

Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation 9