Sun Microsystems 150 manual Attaching the Antistatic Wrist Strap, Removing the System Cover

Page 8

FIGURE 2 Removing the System Cover

Attaching the Antistatic Wrist Strap

1.Unwrap the first two folds of the wrist strap. Wrap the adhesive side firmly against your wrist.

2.Peel the liner from the copper foil at the opposite end of the wrist strap.

3.Attach the copper end of the wrist strap to the chassis (FIGURE 3).

4.Disconnect the AC power cord from the system.

4 Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Guide • June 2002

Image 8

Contents Page Please Recycle Contents Cleaning a CD or DVD Handling and Storing CDs and DVDs Sun Blade 150 CD-ROM DVD-ROM, and Hard Drive Installation Required ToolsPowering Off the System Preparing to Replace ComponentsRemoving the System Cover Attaching the Antistatic Wrist Strap Removing the System CoverRemoving a Primary Hard Drive Attaching the Wrist Strap to the ChassisLift the hard drive tray from the hard drive Replacing a Primary Hard Drive Installing a Secondary Hard Drive Installing a Secondary Hard Drive J502 J501 J504 IDE J503 IDE Removing a CD-ROM or DVD-ROM Drive Replacing a CD-ROM or DVD-ROM Drive Removing and Replacing a CD-ROM or DVD-ROM DriveFinishing Component Replacement Replacing the System CoverPowering On the System Hard Drive MirroringInserting a CD or DVD Into the Drive Hard Drive Mirroring ConfigurationCD or DVD Handling and Use Handling and Storing CDs and DVDs Cleaning a CD or DVDEjecting a CD or DVD