Sun Microsystems Sun Quad manual Set the ipg1 and ipg2 parameters for the above four devices

In the third line in the previous example:

■Name = SUNW,qfe

■Parent = /pci@1f,2000/pci@2

■Unit-address = 2,1

In the fourth line in the previous example:

■Name = SUNW,qfe

■Parent = /pci@1f,2000/pci@2

■Unit-address = 3,1

2.Set the ipg1 and ipg2 parameters for the above four devices in the

/kernel/drv/qfe.conf file.

name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “0,1” ipg1=20 ipg2=10; name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “1,1” ipg1=20 ipg2=10; name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “2,1” ipg1=20 ipg2=10; name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “3,1” ipg1=20 ipg2=10;

3.Save the qfe.conf file.

4.Save and close all files and programs, and exit the windowing system.

5.Halt and reboot the system by typing the init 6 command at the superuser prompt.

38 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997