Sun Microsystems X2100 M2 manual Installation Worksheet

TABLE 1 Installation Worksheet

			Your Answers:
			Defaults are noted
Information for Installation		Description or Example	with an asterisk. (*)
Language		Choose from the list of available languages for the	English*
		Solaris 10 software.
Locale		Choose your geographic region from the list of	English (C - 7-bit
		available locales.	ASCII)*
Terminal		Choose the type of terminal that you are using
		from the list of available terminal types.
Network connection		Is the system connected to a network?	• Networked
			• Non-
			networked*
DHCP		Can the system use Dynamic Host Configuration	• Yes
		Protocol (DHCP) to configure its network	• No*
		interfaces?
If you are not	IP address	If you are not using DHCP, supply the IP address
using DHCP,		for the system.
note the		Example: 129.200.9.1
network
	Subnet	If you are not using DHCP, is the system part of a	255.255.0.0*
address.
		subnet?
		If yes, what is the netmask of the subnet?
		Example: 255.255.0.0
	IPv6	Do you want to enable IPv6 on this machine?	• Yes
			• No*

28 Sun Fire X2100 M2 Server Installation Guide • August 2006